Hz dimensions

Boston HD5 Diffusori da scaffale di ottima costruzione made in USA colore nero in ottime condizioni estetiche. Sono appena state ribordate con foam originale da un laboratorio specializzato. Ritiro a mano oppure spedizione tramite corriere espresso 15 euro Caratteristiche: Frequency Response: 65-20,00 Hz Nominal Impedance: 8 ohms Tweeter: 3/4" Dome Woofer: 5 1/4" copolymer Crossover Frequency: 3,500 Hz Dimensions: 13 1/2" x 8 1/4" x 7 1/4"

Marchio: JB Systems Categoria: Mixer Analogici Power consumption: 35 W Color: black Frequency response: 20 - 20,000 Hz Supported audio formats: APE, FLAC, MP3, WAV, WMA Supported audio media: USB Functions: equalizer, sound effects Input: 3-pin XLR, RCA, jack, USB, Bluetooth, IEC Output: 3-pin XLR, RCA, jack, USB Power input: 100 - 240 VAC 50/60 Hz Dimensions: 63 x 38 x 12 cm Weight: 6.64 kg

Marchio: Audiophony Categoria: Finali di potenza Class-D amplifier Switched-mode power supply Mode selection: Stereo, Bridge or Parallel Independent limiter for each channel Extremely accurate and independent level settings for each channel LEDs indicators Convection cooled Balanced Jack TRS and XLR inputs Unbalanced RCA outputs Binding post-jacks or speakON outputs Short-circuit, over current and high temperature independent protections for each channel 2x19" rack mount spaces Stereo Max power: 4 Ω RMS stereo power (minimum): 2 x 150 W RMS; 8 Ω RMS stereo power: 2 x 80 W RMS Mono bridged Max power: 8 Ω bridged power (minimum): 1 x 300 W RMS Signal-to-noise ratio Less than 90 dB Input sensitivity: 4 dBu +/-2 dB Distortion: THD at 1 kHz 1/2 rated power Less than 0.1%; Slew rate: - 65 dB at 1 kHz; Frequency response (4 Ω/1 W): +0.5 dB; 20 Hz-20 kHz Input impedance: unbalanced 15 kΩ / Balance 30 kΩ Clip: 0 dBr Cooling: Convection cooled Input connectors: XLR3-F, Balanced 6.35 mm TRS-F jack + Unbalanced RCA Output connectors: Binding post-jacks + 4-pole speakON® Front control panel: AC power switch, Channel 1 and 2Volume Rear control panel: Mode selection button Indicators: Protect (red) / Clip (yellow) / Signal (green) Protections: Short-circuits, over current and high temperature protected Power supply: 100/230 V AC - 50/60 Hz Dimensions: 482 mm x 44 mm x 330 mm NetWeight: 4.3 kg

Marchio: Audiophony Categoria: Finali di Potenza Class-D amplifier Switched-mode power supply Mode selection: Stereo, Bridge or Parallel Independent limiter for each channel Extremely accurate and independent level settings for each channel LEDs indicators Convection cooled Balanced Jack TRS and XLR inputs Unbalanced RCA outputs Binding post-jacks or speakON outputs Short-circuit, over current and high temperature independent protections for each channel 2x19" rack mount spaces Stereo Max power: 4 Ω RMS stereo power (minimum): 2 x 150 W RMS; 8 Ω RMS stereo power: 2 x 80 W RMS Mono bridged Max power: 8 Ω bridged power (minimum): 1 x 300 W RMS Signal-to-noise ratio Less than 90 dB Input sensitivity: 4 dBu +/-2 dB Distortion: THD at 1 kHz 1/2 rated power Less than 0.1%; Slew rate: - 65 dB at 1 kHz; Frequency response (4 Ω/1 W): +0.5 dB; 20 Hz-20 kHz Input impedance: unbalanced 15 kΩ / Balance 30 kΩ Clip: 0 dBr Cooling: Convection cooled Input connectors: XLR3-F, Balanced 6.35 mm TRS-F jack + Unbalanced RCA Output connectors: Binding post-jacks + 4-pole speakON® Front control panel: AC power switch, Channel 1 and 2Volume Rear control panel: Mode selection button Indicators: Protect (red) / Clip (yellow) / Signal (green) Protections: Short-circuits, over current and high temperature protected Power supply: 100/230 V AC - 50/60 Hz Dimensions: 482 mm x 44 mm x 330 mm NetWeight: 4.3 kg

Marchio: Definitive Audio Categoria: Sistemi a Colonna e Line Array Passive wide band column Speakers: 12 x 2,75’’ wide band Line Array Output power: 200 WRMS Frequency response: 200 Hz – 20 kHz SPL: 120 dB Impedance: 8 ohms Cabinet: aluminium Grid: 1 mm steel Cover included Dimensions: 1040 x 240 x 220 mm Weight: 7 kg Active vented subwoofer equipped with DSP Amplifier circuit: Class-D Speakers: 2 x 10’’ with 2.5’’ voice-coil 450Z RMS power: 500 W (Sub) + 250 W (Sat) Frequency response: 50 Hz – 200 Hz SPL: 121 dB Inputs: Combo (XLR / jack 6.35 mm) Outputs: balanced XLR, XLR link for VORTICE 210SA subwoofer and speakON for VORTICE columns Volume adjustment knob Sensitivity adjustment button: +4/-10 dBu DSP: 3 positions depending on the number of columns and boxes Compressor: excellent workmanship and operation Cabinet: high quality plywood Finishing: high resistance black paint Grid: 1.2 mm steel Power supply: 115 - 230 V∿ – 50/60 Hz switchable voltage indicator: LED Dimensions: 585 x 455 x 755 mm Weight: 23.5 kg

Vendo casse B&W DM550 come nuove, per inutilizzo. Sotto trovate le principali caratteristiche. Viste le dimensioni ed il peso scambio a mano su Torino. Frequency Range: 56 Hz to 30 kHz (-6 dB points) Bass Loading: Second-order closed box alignment Frequency Response: 75 Hz – 20 kHz, ±2,5 dB on reference axis Dispersion: 20 Hz to 15 kHz Vertical: ±2 dB over 10° arc Horizontal: ±2 dB over 40° arc Sensitivity: 87 dB (2,83 V/ 1 m) Distortion (For 90 dB at 1 m) Second Harmonic: Less than 3% at 20 Hz to 200 Hz Less than 1% at 200 Hz to 20 kHz Third Harmonic: Less than 2% at 20 Hz to 200 Hz Less than 1% at 200 Hz to 20 kHz Impedance: Nominal 8 Ω (not faling below 4 Ω) Crossover: third-order acoustic response low-pass and high-pass Drive Units: 1 x 26mm high-frequency with aluminium dome, One 26mm coil on aluminium former, wound with polymide resin and heat cured 1 x 160mm bass/midrange with composite short fibre, 26mm coil on high temperature former, wound with polymide resin and heat cured Power Handling: Suitable for amplifiers with 10 W to 75 W output Dimensions (H x W x D): 352 x 204 x 243 mm (13-7/8" x 8" x 9-1/2") Weight: 5,5 kg (12 lbs)

Marchio: Alctron Categoria: Microfoni a Condensatore High quality studio microphone Large gold-plated capsule of 32 mm Polar pattern: cardioid Frequency response: 20 Hz - 20 kHz Sensitivity: -36 dB ±2 dB (0 dB = 1/V/Pa at 1000 Hz) Output impedance: b' SPL max.: 125 dB for 0.5% THD S/N ratio: 70 dB Connector: 3-pin XLR Power supply: 48 V⎓ Dimensions (W x H): 30 x 11 x 9 cm Weight:: 1 kg Caratteristiche Soundball Foam filter with ultra-efficient pop filter Ultra-efficient metal pop filter Compatible with microphone of 44 - 52 mm diameter Color: black Dimensions: 22 cm diameter Weight:: 165 g

Power: 100 W RMS - 200 W max Frequency response: 180 Hz -20 KHz SPL max. (@1 m): 116 dB Nominal impedance: 4 ohms Speaker: 6 x 2.75" full-range Dispersion: 120° x 20° (HxV) Connector: integrated in base Dimensions: (80 x 80 x 830 mm) x2 Net weight: 2.45 kg + 1.20 kg = 3.65 kg Power: 150 W RMS - 300 W max Frequency response: 50 - 200 Hz SPL max. (@1m): 116 dB Nominal impedance: 4 ohms Boomer: 8 inches Dimensions: 340 x 430 x 400 mm Net weight: 12.6 kg Bass stage: 1 x 150 W RMS / 300 W max Class D / 4 Ohms Mid/high stage: 1 x 100 W RMS / 200 W max Class D / 4 Ohms

Causa inutilizzo vendo impianto audio professionale cosi composto: 2 casse passive Toa/Onkyo mod. 380 SE - 3 vie - woofer da 15'' + tromba medi + tweeter (vedi caratteristiche sotto allegate) perfette - originali - mai riparate - 380 watt rms - mede in Canada (USA) + finale di potenza Toa/ Onkyo P 150 D - 180 + 180 watt su 8 ohm - perfetto ed originale - una macchina superaffidabile - Se devi fare un impianto fisso in una sala da ballo media - o un impianto di ottima qualita audio fa un grande affare. L'impianto NON è vendibile separatamente - ed è perfettamente funzionante ed originale- Fatto controllare da laboratorio specializzato a Torino Dato il peso degli oggetti NON è possibile la spedizione - Le foto sono reali degli oggetti in vendita - NO perditempo - NON trattabile - NO scambi merce - no cercatori di foto - se sei realmente interessato contattami al cellulare 347 0083722 Annuncio visibil = merce disponibile Caratteristiche tecniche delle casse Enclosure: Vented (bass reflex) type Speakers: Low Frequency, 15" woofer Mid Frequency, CD Horn plus compression driver High Frequency, Horn tweeter Power Handling Capacity Continuous Pink Noise: 120 watts RMS of band-limited pink noise (50 Hz~20 kHz) Continuous Program: 360 watts Impedance: 8 ohms Sensitivity: 102 dB (1W/1m) Input Panel Frequency Response: 50 Hz~20 kHz Crossover Frequencies: 800 Hz, 8 kHz High and Mid Frequencies Level Controls: 0~ –10 dB (with an "OFF" position) Input Terminals: ¼" Phone jacks for a full-range, biamp, triamp and chaining Finish (Enclosure): Polyester in grey color Dimensions: 758(H)X498(W)X410(D)-mm 29.8(H)X19.6(W)X16.1(D) inches Weight: 36 kg (79.2 Ibs)

Vendo stereo completo semi-professionale con componenti di alta qualità tutti di marca Technics + coppia di fantastiche casse Bose 4.2serie II + telecomandi + sub woofwr celestion + cavetti vari. L'impianto e tutto in condizioni perfette, vendo per inutilizzo e necessita di spazio. Descrizione: N.1 SINTONIZZATORE STEREO TECHNICS ST-GT550 Type:Mono/Stereo Tuner TuningBands: FM, MW, LW TuningScale: Digital FM TuningRange: 87.5 to 108 MHz MW TuningRange: 525 to 1611 kHz LW TuningRange: 144 to 288 kHz Sensitivity:1.5uV (FM), 20uV (MW), 150uV (LW) Signal toNoise Ratio: 70dB (FM) Distortion:0.2% (FM) Selectivity:70dB (FM), 40dB (MW), 40dB (LW) Frequencyresponse: 10Hz to 15kHz (FM) N.1 LETTORE CD TECHNICS SL-PS670D Discformat: CD Digitalconverter: MN6474, 1-bit MASH CDMechanism: CDM-12.1 Frequencyresponse: 2Hz to 20kHz Dynamicrange: 98dB Signal toNoise Ratio: 107dB Totalharmonic distortion: 0.0027% Lineoutput: 2V Digitaloutputs: optical Dimensions:430 x 114 x 290mm Weight: 4kg Accessories:remote control N.1 AMPLIFICATORE TECHNICS A700MK3 Poweroutput: 45 watts per channel into 8? (stereo) Frequencyresponse: 20Hz to 20kHz Totalharmonic distortion: 0.01% Dampingfactor: 60 Inputsensitivity: 2.5mV (MM), 150mV (line) Signal tonoise ratio: 76dB (MM), 91dB (line) Channelseparation: 50dB (line) Output:150mV (line) Speakerload impedance: 4? to 16? Dimensions:430 x 125 x 318mm Weight:6.7kg N. 1 COPPIA CASSE BOSE 4.2 SERIES II Tipo: sistema di altoparlanti a 2 vie e 3 driver Amplificatore raccomandato: da 10 a 150 W.Impedenza: 8? Bassi: 1 cono da 200 mm Tweeter: cono 2 x 76mm Dimensioni: 270 x 430 x 235 mm Peso: 14,2 kg N.1 SUBWOOFER PASSIVO CELESTION CS 135 Sistema: Woofer: 8 pollici / 203 mm con doppia bobina Potenza nominale: 90 W Gamma di frequenza: 42-120 Hz Impedenza: 8 ohm Dimensioni (L x A x P): 52 x 20 x 34 Peso: 12 kg Le spese di spedizione sono comprese nel prezzo, verrà spedito il tutto in un pallet 80x60. Grazie a tutti.

VERA OCCASIONE.Vendesi WILSON AUDIO SOPHIA 2 color grigio chiaro/argento. Esteticamente presentano leggeri segni di usura. Acusticamente coni e membrane integre, perfette come nuove.Utilizzate con amplificazione a basso medio volume.Conservate da proprietario amatore.Possibilità di ascolto per valutazione qualità.Solo realmente interessati.NO PERDITEMPO,SOLO CONSEGNA A MANO SUL POSTO e prezzo TRATTABILISSIMO. Drivers Tweeter One - 1 inch 2.54 cm inverted titanium dome Midrange One - 7 inch 17.78 cm Measurements Woofer One - 10 inch 25.4 cm aluminum cone Sensitivity 89 dB, 2.83 volts at 1 meter Nominal Impedance 4 ohms (3 ohms minimum) Minimum Amplifier Power 12 WATTS per channel Frequency Response +0, -3 dB 29 Hz - 22kHz Average in-room response Overall Dimensions Enclosure Type Sophia Rear Ported Overall Dimensions Height: 41 1/4 inches 104.775 cm With Spikes 43 1/8 inches 110.13 cm Width 12 3/4 inches 32.385 cm Depth 18 inches 45.72 cm System Weight Per Channel 160 lbs. 72.72 kgs System Shipping Weight (approx.)

Causa cambio di casa devo vendere: 1) Denon Amplificatore PMA1500ae. Output per canale 70W 8 ohms, 140W 4 ohms. 20Hz - 20 kHz, THD 0.07% Input Phono MM o MC. 3 x analogice inputs. 2 x Tape inputs/Outputs. Pre Out e P.Direct (Power Amp Direct). Dimensions: 434 x 134 x 410mm Weight: 14.6kg Accessories: remote control 2) Casse EPOS Elan 35. Alta qualità e suono di alta fedeltà della nota casa inglese, tinta ciliegio, Frequency response ± 3dB 44 - 25000 Hz Nominal impedance 4 Ohm Amplifier Requirements 10 - 200 W Sensitivity (2.83V/1m) 92 dB Dimensions (A x L x P) 915 x 210 x 320 mm Weight 20.8 kg Sono in eccellenti condizioni e perfettamente funzionanti. Possibilità di ascolto prima di comparare. Solo ritiro a mano nei Castelli Romani per peso consistente e delicatezza del prodotto. (Non vendo singolarmente)

VERA OCCASIONE.Vendesi WILSON AUDIO SOPHIA 2 color grigio chiaro/argento. Esteticamente presentano leggeri segni di usura. Acusticamente coni e membrane integre, perfette come nuove.Utilizzate con amplificazione a basso medio volume.Conservate da proprietario amatore.Possibilità di ascolto per valutazione qualità.Solo realmente interessati.NO PERDITEMPO,SOLO CONSEGNA A MANO SUL POSTO e prezzo TRATTABILISSIMO. CONTATTI CELLULARE E MESSAGGI WHATSUP -------FOTO NUOVE CARICATE--------- Drivers Tweeter One - 1 inch {2.54 cm} inverted titanium dome Midrange One - 7 inch {17.78 cm} Measurements Woofer One - 10 inch {25.4 cm} aluminum cone Sensitivity 89 dB, 2.83 volts at 1 meter Nominal Impedance 4 ohms (3 ohms minimum) Minimum Amplifier Power 12 WATTS per channel Frequency Response +0, -3 dB 29 Hz - 22kHz Average in-room response Overall Dimensions Enclosure Type Sophia Rear Ported Overall Dimensions Height: 41 1/4 inches {104.775 cm} With Spikes 43 1/8 inches {110.13 cm} Width 12 3/4 inches {32.385 cm} Depth 18 inches {45.72 cm} System Weight Per Channel 160 lbs. {72.72 kgs} System Shipping Weight (approx.) 452 lbs. {205.55

Subwoofer attivo acoustic research S10H0 bassi mostruosi, caldi e corposi. il subwoofer ideale per il tuo impianto home theatre o in qualsiasi contesto musicale. 150w di potenza effettiva vero gioiello introvabile e made in USA colore nero euro 400 emanuele 335 6777429 spedisco in tutta italia! a 25cm cone type woofer of long stroke type is carried in low-pass. multi-port slot loading method is adopted as enclosure. two kinds of input terminals of high level and low level are carried. variable adjustment function and auto sensing function of input level and crossover frequency are carried. method amplifier built-in • 1 way • 1 speaker • multiport slot loading used unit for low-pass: 25 cm cone type frequency characteristic 35 hz to 200 khz ± 3 db impedance 8 Ω allowable input 150 w (rms) crossover frequency 40 hz to 200 hz (continuously variable) external dimensions width 360 Ãâ€â€ height 350 Ãâ€â€ depth 360 mm weight 14.0 kg

Infinity rs5 Usato prezzo EUR.600,00 Diffusori della INFINITY RS5, degli anni meta' '80, con tele Originali, Perfettamente Funzionanti e Originali, unico difetto si e' rotta una la vite di 1 connettore di una cassa (pero' ugualmente funzionante), e poi e' stato riparato il legno di una cassa nella parte posteriore (quindi non e' visibile). Se interessati contattatemi pure che invio altre foto.. Reference Standard 5 Introduced: 1982 () Dimensions: 74 x 34 x 25 cm Bass: 2 x 16 cm Mids: 1 x Polydome Highs: 1 x EMIT Suggested for amplifiers with: 35-125 Watts per channel Frequency range: 43 Hz - 32 kHz Crossover frequencies: 600 Hz, 4000 Hz - Solo ritiro diretto - A euro 600 Mirko ((BO)) Bologna (BO)

Mixer analogico con 8 ingressi con DSP per effetti e compressore sui canali microfonici. Il dispositivo USB/SD/BT integrato conferisce ulterioreVersatilità, evitando l'esigenza di periferiche aggiuntive. Inputs: 8 Mic Input channels: 4 Stereo Input channels: 2 Mic: +6 dB - +50dB Line: +10 dB - -34dB EIN: -100dB Frequency response Mic Channel: 10 Hz - 20 kHz +1/-3 THD Mic Channel: ≤0.03% Signal to noise ratio: 80dB Output Levels: MAX +27(BAL), MAX +22(UNBAL) Hi: 2.5 kHz Mid: 2.5 kHz Low: 45 Hz Low Cut: 80 Hz Compressor: YES + 48V Phantom power: YES MP3/USB/SD Media Player: YES DSP Effects 16 programs: YES Bluetooth player: YES Dimensions (W x H x D): 283x70x359(mm)

Marchio: Rondson Categoria: Microfoni Senza Filo Palmari Four Channel Wireless Handheld Microphone System; PLL synthesizer; UHF Frequency Range: 669.1/655.0/676.6/663.0 MHz easy-to-read LCD displays; 50 mt. in open areas; Modulation Type: FM; Frequency Deviation: +/- 22 kHz; Frequency Response: 50-15.000 Hz; Frequency Stability: +/- 10 ppm; Interference Rate: b'>' 50dB; S/N Ratio: b'>' 90dB; Sensitivity: - 80 dBuV; Distortion: b' Output Impedance: 600 ohm; Audio Output Level: - 400 mV (balanced/unbalanced); Output connectors: 4x XLR-3M, 1x Jack TRS 6,3mm; Antenna connectors: 2x BNC; Receiver BE-1040: dimensions: 480x180x46 mm, weight: 3,5 kg, power: 110-240V / 12 V 1000 m A, consumption: b' Transmitters BE-1040MIC: dimensions: 240x50x33mm, RF Power: 10 mW, power supply: 2x 1,5V AA.

GOMono-F5 receiver 16 UHF frequenciess Frequency range: UHF 514~542 MHz (4G compatible) The Diversity system ensures a perfect reception Adjustable Squelch to absorb interferences You can use up to 4 receivers at the same time (4 mic) Adjustable antennas (front) Average range in perfect conditions: 70m Outputs: balanced XLR3-M and 6.35 mm TS-F unbalanced jack Use FREE-RACK to stack them in racks (optional) Dimensions: 130 x 36 x 92 mm GOBody-F5 transmitter Must be combinedWith a tie-clip or headband GO series microphone and a GO-MONO receiver High-quality electret microphone THD: b' Input: mini XLR3-F 2 sensitivity modes: line or micro OperatesWith 2x1.5V type AA batteries Must be combined With a tie-clip or headband GO series microphone and a GO-MONO receiver Dimensions: 237 x 58 mm GOHead headband microphone Headband microphone only. Must be combinedWith a GO-BODY transmitter and a GO-MONO receiver Mini XLR3-F connector SuppliedWith a microphoneWindshield and an adjustable headband Unidirectional electret Frequency response: 100 Hz at 16 kHz S/N: b'>' 60dB Impedance: 2.2 kohm

Marchio: Audiophony Categoria: Finali di potenza Output power: 240 W RMS Max powers / Impedance: 100 V (42 ohm); 70 V (21 ohm); 4 ohm (31 V) XLR balanced input XLR balanced output Max power terminal 24 V DC Input terminal Input sensitivity: 1.0 V (adjustable) Input impedance: 10 k ohm (balanced) Frequency response: 70 Hz - 18 kHz (+/-3 dB) T.H.D (1 kHz, 1/2 nominal power): b' Signal to noise ratio: 90 dB Ground Li ft power switch Filtre Passe haut 400 Hz activable par switch Power supply: 100 - 240 V, 50/60 Hz, AC; 24 V, DC (safe power supply) Protections: Short-circuits, Thermal, Overcharge Power consumption: 361 W Mountable in 19" rack Height: 2 units Dimensions (L x H x D): 482 x 88 x 330 mm NetWeight: 13.8 kg

Column Power 180 W RMS - 360 W max. Nominal impedance 6 ohm Boomer: 6 x 3" Tweeter: 1 x 1" Dispersion: 120° x 30° (H x V) Connector: slot-in integrated into the subwoofer Dimensions: 103 x 750 x 100 mm x 2 Net weight: column 3.75 kg / spacer: 2.1 kg Subwoofer Power: 250 W RMS - 500 W max. Nominal impedance: 4 ohm Woofer: 1 x 10" Dimensions: 389 x 626 x 626 mm Net weight: 21.8 kg Complete system Frequency response: 38 Hz - 18 kHz Max. SPL (@ 1m): 122 dB Amplifier module Low frequencies 1 x 300 W RMS / 600 W max Mid/High frequencies 1 x 300 W RMS / 600 W max

Satellite Power: 400 W RMS - 800 W max. Nominal impedance: 4 ohm Woofer: 3 x 8" neodymium Tweeter: 12 x 1" Dispersion: 100° x 70° (H x V) (-10 dB) Dimensions: 255 x 695 x 400 mm Net weight: 11.5 kg Subwoofer Power: 700 W RMS - 1400 W max. Nominal impedance: 4 ohm Woofer: 1 x 15" Dimensions: 483 x 725 x 585 mm Net weight: 36.5 kg Satellite + subwoofer Frequency response: 35 - 18,000 Hz SPL max. (@ 1 m): 128 dB Amplification Low stage: 1 x 700 W RMS / 1400 W max. at 4 ohm Mid/high stage: 1 x 400 W RMS / 800 W max at 4 ohm Level: level adjustment on each channel + master Sub: adjustment of the level of the box Inputs CH1: 1 x XLR Combo / line jack / MIC CH2: 1 x XLR / line jack / MIC Combo CH3: 1 x line jack CH4/5: 1 x RCA L/R line + Bluetooth input Input impedances MIC 1/2: balanced 40 kohm Line 1/2: symmetrical 10 kohm Line 3: symmetrical 20 kohm Line 4/5: asymmetrical 5 kohm Outputs 1 x insert on top of the satellite box 1 x XLR MIX OUT balanced for output to another system 2 x XLR LINE OUT symmetrical for repique CH1 and 2 DSP 24 bit (1 in 2 out) EQ / presets / low cut / delay / Bluetooth TWS

Hardware features 20 playback faders - 10 macro / executor buttons Schermo touchscreen da 15,6" ad alta luminosità Superficie di controllo espandibile con l'opzionale Tiger Touch Fader Wing 3 encoder ottici di alta qualità Supporta uno schermo aggiuntivo Sicurezza Avokey integrata UPS integrato Software Software platform: Avolites Titan DMX channels per device: 8192 max. DMX channels per system: 32,768 3D Visualisation: capture engine built in Max. fixtures: unlimited Keyframe effect engine: custom effects with any number of keyframes Pixel mapping: animation based, video via Synergy External control: Web API, MIDI, DMX, sACN Titan Net: multi-user with any Titan console Output formats: Art-Net, sACN, or DMX-512 OS: Microsoft Windows 10 Enterprise Connectivity DMX-512: 4 x Neutrik 5-pin XLR, optically isolated Network: 2 x 1 Gb Ethernet connections Mains power: IEC Data / peripherals: 4 x USB 2.0 plus 1 x USB 2.0 front-mounted External display: Display Port and DVI (one active output only) MIDI: IN b'&' OUT 5-pin DIN SMPTE: 3-pin XLR Switch trigger: 1/4" jack Physical specifications Power consumption: 80 W Power specification: 110 - 240 V AC 50/60 Hz Heat output: 272.8 BTU/hr Operating environment ambient temp: 0 to 40 °C Max humidity 95% relative noncondensing Internal UPS 5 separate 5-minute periods, fully software integrated Unit dimensions (W x D x H): 674 x 435 x 147 mm Weight: 15.2 kg Flight case dimensions: 750 x 620 x 300 mm Weight in flight case: 29.4 kg

Marchio: Rondson Categoria: Microfoni Senza Filo ad Archetto Four Channel Wireless Microphone System bodypack; BE-10HM: Lavalier microphone compatible with BE-10 and BE-20 sets; BE-10BP: Headset microphone compatible with BE-10 and BE-20 sets; PLL synthesizer; easy-to-read LCD displays; 50 mt. in open areas; Modulation Type: FM; Frequency Deviation: +/- 22 kHz; Frequency Response: 50-15.000 Hz; Frequency Stability: +/- 10 ppm; Interference Rate: b'>' 50dB; S/N Ratio: b'>' 90dB; Sensitivity: - 80 dBuV; Distortion: b' Output Impedance: 600 ohm; Audio Output Level: - 400 mV (balanced/unbalanced); Output connectors: 4x XLR-3M, 1x Jack TRS 6,3mm; Antenna connectors: 2x BNC; Receiver BE-1040: dimensions: 480x180x46 mm, weight: 3,5 kg, power supply: 110-240V / 12 V 1000 m A, consumption: b' Transmitters BE-1040BP: dimensions: 58x18x100mm, RF Power: 10 mW, power: 2x 1,5V AA.

Marchio: Audiophony Categoria: Subwoofer Attivi Power: 700+700 W RMS / 4 ohm Frequency: 50 Hz - 200 Hz Sensitivity: 96 dB /124 dB max Impedance: 8 ohm Speakers: 12'' Dimensions: 350 x 515 x 490mm NetWeight: 23.5 kg Dispersion HxV - Power supply: Powercon In/Out: AC 220 V-240V / 50/60 Hz.20A DSP:RJ45 In/Out Materials: Finnish birch plywood and integral steel grill protection Finishing:White polyurethane paint

Marchio: Audiophony Categoria: Finali di Potenza Output power: 240 W RMS Max powers / Impedance: 100 V (42 ohm); 70 V (21 ohm); 4 ohm (31 V) XLR balanced input XLR balanced output Max power terminal 24 V DC Input terminal Input sensitivity: 1.0 V (adjustable) Input impedance: 10 k ohm (balanced) Frequency response: 70 Hz - 18 kHz (+/-3 dB) T.H.D (1 kHz, 1/2 nominal power): b' Signal to noise ratio: 90 dB Ground Li ft power switch Filtre Passe haut 400 Hz activable par switch Power supply: 100 - 240 V, 50/60 Hz, AC; 24 V, DC (safe power supply) Protections: Short-circuits, Thermal, Overcharge Power consumption: 361 W Mountable in 19" rack Height: 2 units Dimensions (L x H x D): 482 x 88 x 330 mm NetWeight: 13.8 kg

KEF Coda 7 Altoparlanti Bass-Reflex a 2 vie Bellissimi Bellissimo set di altoparlanti, della prestigiosa casa Britannico-Belga nata nel 1961, testato e funzionante bene in buone condizioni. Anche la serie di foto fa parte della descrizione. La struttura di montaggio e la qualità dei materiali e delle innovazioni tecniche, la tecnica costruttiva di avanguardia e l'isolamento acustico perfettamente studiato ne fanno degli altoparlanti di grande eccellenza. Specifiche tecniche: - Tipo di sistema a 2 vie - Tipo di custodia Reflex - Risposta in frequenza: ± 3dB 48 - 20000 Hz - Impedenza nominale 6 ohm - Requisiti dell'amplificatore 10 - 70 W - Dimensioni cm 18 x 24 x h30 (7,1 x 9,3 x 11,8 pollici) - Peso 3,3 chilogrammi (7,3 libbre). - Prodotto in Belgio - Numeri di serie: 076933/34 Massima serietà. Spedizioni ovunque. * KEF Coda 7 2-way Bass-Reflex Loudspeakers Beautiful Beautiful set of speakers, of the prestigious British-Belgian house, founded in 1961, tested and working well in good condition. The series of photos is also part of the description. The assembly structure and the quality of materials and technical innovations, the avant-garde construction technique and perfectly studied acoustic insulation they make them excellent speakers. Technical specifications: - Type of 2-way system - Type of housing Reflex - Frequency response: ± 3dB 48 - 20000 Hz - Nominal impedance 6 ohms - Amplifier requirements 10 - 70 W - Dimensions cm 18 x 24 x 30 (7,1 x 9,3 x 11,8 inches) - Weight 3.3 kg (7.3 lbs). - Made in Belgium - Serial numbers: 076933/34 Maximum seriousness. Shipping everywhere.