Less plastic

Description^#^^#^Type:Trash Bag Holder ^#^^#^Car Garbage Bag Clip Adhesive ^#^^#^Kitchen Garbage Bag Holder Hanging,Cabinet doors thickness of less than 2cm. ^#^^#^With 3M adhesive that comes attached to the base of the car anywhere you want to put garbage bags Jieke.^#^^#^Color::Black^#^^#^Material: Plastic^#^^#^Products include:1*Trash Bag Holder

Features:100% Brand new and high quality.It is made of aluminium alloy for strong strength and long durability.Used as a adapter for slide hammer or pulling tap for easy catching and pulling.A necessary component for dent repair, direct replacement for the broken one.Easy installation, the thread size is M10 for better application.Specification:Material: Aluminum AlloyColor:As the picture showType: M10Size: As the picture showHow to use this paintless dent repair kits:1.Clean the dent with a clean wet cloth;2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger thedrawing gasket is, the larger the drawing force is);4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;8. Clean the repaired place with a clean wet cloth.Package Included:1pcs x Slide Hammer18pcs x Blue Glue TabsDo dropshipping ?Yes,we do.If you have any question please contact us.Production Material Safety?All products are 100% brand new, workable and checked carefully before sending out.When is the parcel sent?We will send out order within 5 workdays. The delivery time will vary according to different countries and will be affected by weather, public holidays and so on. If order doesn't received in declare time, please contact us.How about refund?Full refund if the item does not match the description or defective.If there are any other problems, Click on Help^#^^#^How to use:^#^^#^1) Clean the dent with a clean cloth.^#^^#^2) Mount the glue stick into the glue gun and preheat for 5 minutes.^#^^#^3) Chose a proper gasket. Large dent requires a large gasket. (Note: The larger the drawing gasket is, the larger the drawing force is).^#^^#^4) Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue).^#^^#^5) Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres, cooling for about 8 minutes. (The time should be less than 10 minutes and shorter slightly in winter).^#^^#^6) Press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;^#^^#^7) Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.^#^^#^8) Clean the repaired place with a clean wet cloth.^#^^#^Note: This product does not come with a glue gun and glue stick, please prepare it by yourself. If you don't know how to use it, please don't buy it. If you don't understand, please contact customer service. Thank you.

Item Details:_x000D_^#^Stainless steel adjustment knob_x000D_^#^18PCS different size traction tabs are used for different sizes of dents._x000D_^#^Designed to repair auto body small damage easily by manual operation_x000D_^#^Environmental protection, does not destroy the original paint_x000D_^#^Easy to use_x000D_^#^_x000D_^#^Item Name:Car Body Door Dent Removal Puller Slide Hammer Lifter Repair Tool_x000D_^#^Specifications:_x000D_^#^Hammer Lifter Repair Tool_x000D_^#^Material:Stainless steel_x000D_^#^Color:Silver(As Pictures Show)_x000D_^#^Size:120mmx127mm_x000D_^#^_x000D_^#^Tabs£º_x000D_^#^Material: Plastic_x000D_^#^Color:Blue(As Pictures Show)_x000D_^#^Quantity:18pcs_x000D_^#^Function: Dent Repair Tools_x000D_^#^Fit For: Paintless Dent Repair Hail Removal._x000D_^#^_x000D_^#^ _x000D_^#^How to use the repair kits:_x000D_^#^Clean the dent with a clean wet cloth._x000D_^#^Connect the power source and preheat glue stick for 5 minutes._x000D_^#^Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the_x000D_^#^Drawing gasket is, the larger the drawing force is)._x000D_^#^Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue)._x000D_^#^Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)._x000D_^#^Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent._x000D_^#^Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen._x000D_^#^Clean the repaired place with a clean wet cloth._x000D_^#^_x000D_^#^Package Contents:_x000D_^#^1*T Bar Tools_x000D_^#^18*Blue tabs

Description:^#^100% brand new and high quality^#^Material: LED, Plastic and Metal^#^Light Color: White,Yellow,Red,Blue^#^LED Interface: 1157^#^This new product is much safer and brighter!^#^Low Power Consumption. The resistance was added to protect the LED. So the actual output power is less than of the theoretical power.^#^Easy installation, Direct plug in and play.^#^Best used for reversing lights & turn signal lignts^#^SMD Type: COB LED^#^Voltage:12V^#^Size: 40mm*17mm^#^Quantity: 1Pc^#^Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!!^#^Package included: 1 x LED Light Bulb

Product description^#^Our LED headlights advantages:^#^ Super bright COB chip,360 degree clear beam no blind zone^#^ Engineering beam pattern design throw light on road evenly at appropriate angle without foggy light^#^ All-in-one aluminum profile as heat conduction system,360 degree heat radiating^#^ Built-in constant current CPU,instant full brightness without start-up relay^#^ ^#^Specification:^#^ Led Light Source: COB^#^ Type: H1/H7/H8/H9/H11/9005/9006, High Low Beam,Single Beam&Fog Beam^#^ Power: 72W (36W/BULB)^#^ Lumens: 12000LM (6000LM/BULB)^#^ Input Voltage: 9V-32V DC£¨fit 12v/24v car£©^#^ Material: Aluminum PCB and PA66+30% GF Plastic^#^ Life Span: £¾50,000 hours^#^ Connector Type: Plug and Play^#^ Certifications: CE, RoHS, ISO9002, IP68.Beam Angle: 360¡ã^#^ Color Temperature: 8000K ICE BLUE^#^ Operating Temperature: -40¡æ to +105¡æ^#^ Cooling Style: Built-in Fan Cooling and Aluminous Heat Dissipation^#^ Waterproof Grade: IP 67^#^ Warranty: 5 years Warranty^#^ ^#^Package Content:2x H1/H7/H8/H9/H11/9005/9006 LED Bulbs(Optional)^#^^#^Automotive LED headlamps advantages:^#^LED lights than traditional halogen energy, more power.^#^Xenon lamp brightness and proximity, but the LED lights light up without delay, to enhance road safety. Instant start no strong currents impact, effectively protecting the car comes with a battery, improving battery life of more than 30%.^#^Fast cooling, the appearance of the most advanced design, thermal structure ingenious and reasonable.Less warranty, power driver with wide voltage constant current mode, the car can respond to a variety of voltage instability, the effective protection of normal use Led efficient and simple structure. Fewer Components damaged, repair the probability is very low, compared with HID ballast repair lower than 80%.^#^Heating temperature is low, protect the car. Xenon working temperature up to 800 ¡ã -1000 ¡ã, the main reason for the car ignition.^#^LED car headlights simple structure, fewer parts than xenon lamps, significantly lower than the xenon lamp failure rates !^#^Automotive LED headlamps color temperature balancing. The Xenon bulbs in the same color to clear, about 8000K.^#^ ^#^Install Caution:^#^As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.^#^Put the vehicle into park or make sure it is securely in gear.^#^Make sure to have the ignition turned off and the keys removed.^#^Be careful to avoid burns, especially when turning on or off the vehicles lighting.^#^Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.^#^Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.^#^Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

Specifications:^#^It is an interior convenient hook and hanger widely used in car.^#^Small volume and convenient installment when you go shopping or outing.^#^It can be hanged to the headrest pole of the seat back easily and takes up less space.^#^Reasonable design and convenient to use.^#^^#^Item Name: Hook^#^Material: Plastic^#^Quantity: 1Pc^#^Features: Car Seat Back Hook, Universal, Headrest Hanger^#^Size: 11cm x 3.5cm/4.33" x 1.38" (Approx.)^#^^#^Notes:^#^Due to the light and screen setting difference, the item's color may be slightly different from the pictures.^#^Please allow slight dimension difference due to different manual measurement.^#^^#^Package Included:^#^1 x Hook

[product name]: vehicle mounted air pump product size]: About12*6.5*16cm[product material]:ABS[product weight]: gross weight (about)0.7kg[power line length]: About285Cm [product packaging]: color box packaging color box size170*80*155mm[MAXAir pressure]:150psi[rated voltage]:DC12(V)[MAXCurrent: less than10A[inflation time]:5-8min[inflation flow rate]:35L/min,[product features]:1This machine is suitable for12VAutomobile tire,2Also suitable for motorcycles, bicycles, ball games, rubber boats, beach floating beds, inflatable toys, etc.3When you go to work on the highway, in the field or in the morning, if the tire leaks suddenly or the tire is injected, it can be used as first aid.4The correct tire pressure can ensure driving safety and save gasoline. It can be used with the car in case of emergency.5It is equipped with a complete set of inflation nozzles, which can be used to inflate tires, rubber boats, air cushions, inflatable toys, balls and other purposes. [instructions for use]:1Insert the air nozzle on the rubber pipe head directly into the tire valve. When the sound of air leakage from the tire is heard, it indicates that the air is in circulation. Continue to tighten the air nozzle, and the air will no longer leak out.2, insertDC12VIn the cigarette lighter3When inflation occurs, the indicator of the meter rises with the saturation degree of the tire. When the pointer reaches the appropriate tire pressure (the tire pressure of general passenger car tire is 0223kpa=35PSI)Take out the plug and air nozzle to complete the work.4Please use the professional ball needle and plastic nozzle equipped with the machine to connect with the air nozzle to inflate the ball and other air equipment. [precautions]:1It is not allowed to inflate the tires of large and overweight vehicles, such as trucks, trucks, container trucks, etc;2When using, please start the car engine to enhance the power without consuming the battery power;3This machine is limited to DC(DC12V)Power supply, do not use household high voltage AC(AC220V)Power supply;4When inflating, please work continuously10Shut down in minutes10Minutes of cooling to prevent damage to the air pump and accessories, and to extend the life of the motor. When the rubber boat is inflated, it can work continuously30minute;5When the general tire is inflated, it is about3-5Minutes away30PSIIf the tire pressure is normal, the large tire will take a longer time; for example, when the inflation starts, the pointer of the meter will quickly rise to50-100PSI, it means that the air is blocked and the air does not enter the tire. At this time, it is necessary to pull off the air nozzle connector immediately and operate again, otherwise the motor and instrument are easy to be damaged.6When using, do not leave the body, pay attention to the tire pressure at any time, and do not be too saturated;7After the machine is used, the air mouth wrench must be straightened to avoid the rubber elasticity fatigue inside;8If the air pump doesn't start, please open the plug to check and replace it10A);9The machine should be protected from dampness, heavy fall and sand and mud invasion, so as to avoid children's playing with it to avoid damage;10The pressure required for each tire is different. Please refer to the label on the side of the tire or ask the manufacturer

Description:^#^Solid invincible-looking design will deter thieves^#^Attaches to the disk making it extra difficult to remove without the key^#^Mechanical lock core is rigorous design so that technical opening is very difficult.^#^Suitable for motorcycle, electromobile, bicycle.^#^Firmly locked security lock^#^Light weight and easy installation^#^Lock rod diameter of 5mm, brake disc empty less than 5mm can't be used this lock^#^The disk brake hole diameter is over 5.5mm, distance from the disk brake hole to the edge not exceed 3.5cm can fit for it.^#^Material: Metal^#^Size£º5.5cm x 4.4cm/2.2cm2.15'' x 1.72'' x 0.86''(approx)^#^Color:show as pictures^#^Quantity: 1 set^#^Package includes:^#^1 x Disk Brake Lock^#^1 x Plastic Frame^#^2 x keys^#^Note: ^#^1.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.^#^2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. ^#^3.This is not special lock disc.If the bike or motorcycle without disc brake,this device can not used

100% Brand new and high quality^#^^#^^#^^#^Item Type:Glue Pads^#^^#^Material: Plastic^#^^#^Size: As the pictures shown^#^^#^Name: Mat^#^^#^Scope of use: car sunken^#^^#^Color: Blue^#^^#^Quantity: 18Pcs^#^^#^^#^^#^Product packaging: OPP bag^#^^#^Product Features: ^#^^#^HIGH PERFORMANCE: A set of 18 different blue pull tabs for quick and easy repair and removal of dents and dents on the car, and works well with T-hammers or hammers.^#^^#^18 REPAIR SOLUTIONS: 18 different Pulling Tabs in different sizes, replace the pull tabs of different shapes and sizes to repair the dents and avoid damage to the original paint.^#^^#^UNIQUE DESIGN: The bottom of each pull tab has a different texture, used in conjunction with the glue stick, can effectively adhere to the dent and use other tools to pull out the dent for repair.^#^^#^MORE PROFESSIONAL: Made of special high-durability materials. Professional pulling tabs for automotive paint-free repair. Working very well with a mini puller.^#^^#^It is a brief introduce, all the introduce is for reference only.^#^^#^The principle is making glue tabs stick on the dent and use tools pulling the tabs and lift the dent.^#^^#^Big dent needs slide hammer or puller.^#^^#^Small dent needs mini dent lifter or pulling bridge.^#^^#^Use different size glue tabs to different dent.^#^^#^^#^^#^Quick and easy repair tool^#^^#^Suitable for the dent of all kinds of flat metal, such as the surface of automobile metal plate and the washing machine of metal plate^#^^#^Can be used in all kinds of metal pit plane, such as cars, washing machines, refrigerators, etc^#^^#^^#^^#^How to use:^#^^#^1) Clean the dent with a clean cloth.^#^^#^2) Mount the glue stick into the glue gun and preheat for 5 minutes.^#^^#^3) Chose a proper gasket. Large dent requires a large gasket. (Note: The larger the drawing gasket is, the larger the drawing force is).^#^^#^4) Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue).^#^^#^5) Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres, cooling for about 8 minutes. (The time should be less than 10 minutes and shorter slightly in winter).^#^^#^6) Press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;^#^^#^7) Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.^#^^#^8) Clean the repaired place with a clean wet cloth.^#^^#^(Pole and glue stick need to be purchased separately, this product is only a mat)^#^^#^^#^^#^^#^^#^Notes:^#^^#^1. Please check the dent or ding size and choose the proper size of tab for perfect maintenance.^#^^#^2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.^#^^#^3.This product is only a mat, and does not include other accessories, please pay attention to purchase.^#^^#^4. This product does not come with glue gun and glue stick, please prepare it by yourself. If you don't know how to use it, please don't buy it. If you don't understand, please contact customer service. Thank you.^#^^#^^#^^#^Package Include:^#^^#^18pcs x Glue Pads

Description:^#^^#^Material: Plastic^#^^#^Product Color: White^#^^#^Light Color: White^#^^#^Type: Angel Eyes, Super bright COB ring light^#^^#^Light Source: COB^#^^#^Voltage: DC 12V^#^^#^Lumens:400lm^#^^#^With transparent lampshade^#^^#^Ride with style by adding these retrofit LED angel eyes to your car^#^^#^These are intended to be used as an additional with your daytime running lights, inside your headlights^#^^#^Producing Super Bright, Long Lasting Lights with the average of 20,000+ house lifespan, while consuming less power^#^^#^Great resistant and great resistant high temperature^#^^#^Outer Diameter: 60mm/70mm/80mm/90mm/100/110mm/120mm^#^^#^Quantity: 1Pcs^#^^#^Note:^#^^#^Manual measuring, please allow 1-2cm error,thank you.^#^^#^Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!!!^#^^#^Package includes:1Pcs x LED Light Ring

Item Type: Speakers^#^Speakers Types: Tweeters^#^Material Type: Plastic^#^Item Weight: 40g^#^Frequency Range (Hz): 2-20Hz^#^Voltage: 12V^#^2.8 Volts^#^500 Watts^#^Built-in crossover^#^97dB of pure sound^#^For all car audio systems^#^Fits anywhere^#^Instant installation^#^More sound, less energy^#^High efficiency dome tweeter^#^No magnetic field, tapes and credit cards are safe^#^ ^#^^#^Package include:^#^^#^2 x Car tweeters^#^2 x Clip-on-bases^#^2 x Screws^#^2 x Adhesive tapes^#^^#^Note:1lot =2pcs tweeters,not 2pair

100% Brand new and high quality^#^^#^Item Type:Glue Pads^#^Material: Plastic^#^Size: As the pictures shown^#^Name: Mat^#^Scope of use: car sunken^#^Color: Blue^#^Quantity: 18Pcs^#^^#^Product packaging: OPP bag^#^Product Features: ^#^HIGH PERFORMANCE: A set of 18 different blue pull tabs for quick and easy repair and removal of dents and dents on the car, and works well with T-hammers or hammers.^#^18 REPAIR SOLUTIONS: 18 different Pulling Tabs in different sizes, replace the pull tabs of different shapes and sizes to repair the dents and avoid damage to the original paint.^#^UNIQUE DESIGN: The bottom of each pull tab has a different texture, used in conjunction with the glue stick, can effectively adhere to the dent and use other tools to pull out the dent for repair.^#^MORE PROFESSIONAL: Made of special high-durability materials. Professional pulling tabs for automotive paint-free repair. Working very well with a mini puller.^#^It is a brief introduce, all the introduce is for reference only.^#^The principle is making glue tabs stick on the dent and use tools pulling the tabs and lift the dent.^#^Big dent needs slide hammer or puller.^#^Small dent needs mini dent lifter or pulling bridge.^#^Use different size glue tabs to different dent.^#^^#^Quick and easy repair tool^#^Suitable for the dent of all kinds of flat metal, such as the surface of automobile metal plate and the washing machine of metal plate^#^Can be used in all kinds of metal pit plane, such as cars, washing machines, refrigerators, etc^#^^#^How to use:^#^1) Clean the dent with a clean cloth.^#^2) Mount the glue stick into the glue gun and preheat for 5 minutes.^#^3) Chose a proper gasket. Large dent requires a large gasket. (Note: The larger the drawing gasket is, the larger the drawing force is).^#^4) Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue).^#^5) Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres, cooling for about 8 minutes. (The time should be less than 10 minutes and shorter slightly in winter).^#^6) Press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;^#^7) Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.^#^8) Clean the repaired place with a clean wet cloth.^#^(Pole and glue stick need to be purchased separately, this product is only a mat)^#^^#^^#^Notes:^#^1. Please check the dent or ding size and choose the proper size of tab for perfect maintenance.^#^2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.^#^3.This product is only a mat, and does not include other accessories, please pay attention to purchase.^#^^#^Package Include:^#^18pcs x Glue Pads