Planning engineer
Elenco delle migliori vendite planning engineer

Italia
The EMC Engineer is an expert with more than three years experience, who provides for the inclusion in the laboratories of Electromagnetic Compatibility of CESI Milan. He/she will take care of the testing activities and the drafting of the related reports, in accordance with the standards, corporate procedures and reference regulations. Active participation is required in the revision of test procedures and the deepening of regulations, with a view to periodic adjustments and expansion of activities into sectors (for example EMC tests in the field of e-mobility, aereospace, etc.). The test engineer for EMC will interface with customers and coordinate CESI for the planning and execution of testing activities. Part of the work will be on shift (both morning and evening). Education and training • Degree in Electronic Engineering, preferably in telecommunications (Radio Frequency) Knowledge • Basic knowledge of analog and digital electronic circuits; • In-depth knowledge of industrial and laboratory electrical and electronic measurements. Mastery of the main EMC laboratory instruments, such as oscilloscope, multimeter, spectrum analyzer, EMI receiver, antennas, etc.); • Ability to interpret regulations and set up compliant test setups; • Experience in drawing up operating procedures and technical documentation; • Knowledge of the main document processing software of the Office package (Word, Excel, PowerPoint); • Knowledge of EMC laboratory software for testing; • Previous experience in Project Management (schedule management, risk-analysis, use of MS Project). Experiences • At least one years experience in electronic design activities or, preferably, at electromagnetic compatibility laboratories, with active involvement on topics of electromagnetic compatibility tests; Abilities and aptitudes • Problem-solving orientation • Collaborative and open-minded approach with adaptability, resilience and rapid and independent response • Ability to establish open and competent relationships with colleagues • Ability to motivate and positively influence other colleagues • Technical/scientific curiosity • Organisation and planning • Flexibility and ability to work in virtual and multicultural teams • Readiness and willingness to travel both domestically and internationally • Good written and spoken English Settore: Ingegneria Ruolo: Ingegneria/Progettazione Tipo di occupazione: Contratto a tempo indeterminato
Vista prodotto

Italia
Are you ready to take your career to new heights? At D-Orbit, were pioneering the future of space logistics, transportation and servicing. Established in 2011, our company is leading the way in helping businesses profitably and sustainably unlock the full potential of the final frontier. As a member of our team, youll have the opportunity to work alongside a diverse group of highly skilled individuals, all driven by a shared passion for innovation and excellence. Join us in our global mission to push the boundaries of whats possible and take your ambition to new heights. Apply now and join us in shaping the future of space. D-Orbit is hiring a senior systems engineer to join our growing systems engineering team. As an integral part of the group, you will be responsible of the customization of already flight-qualified platforms, such as the ION Satellite Carrier Vehicle, and the design of new advanced missions. Your ultimate objective as a systems engineer is to ensure your systems, the spacecraft, will fly safely to orbit, deliver the services required by mission objectives and eventually successfully accomplish its disposal. Main Duties will consist of · Coordinate other systems and specialist engineers, following and consolidating the end-to-end design and development cycle of the systems platforms, starting the requirements capture and consolidating requirements as development progresses, trade-off analysis, systems architecture and design definition, definition of the verification and test campaign, test plan and procedures, supervising execution of the tests on first prototypes and final requirements compliance assessment. · Interface with the Program Manager to support planning and management task. · Coordinate with the Procurement team to support in the procurement process of test and flight parts. · Coordinate with the manufacturing team and the AIV team for the definition of the test plan, procedures, setup and execution, monitor AIV progresses and maintain the requirement compliance matrix updated accordingly. · Interface with the Flight Operations team to support the definition of the detailed ConOps, mission timeline, operations plan definition and procedures, and provide active support during the first flight operations. Tasks and Responsibilities: - Technical responsible for the overall spacecraft or mission. - Actively contribute and monitor the development of systems architecture and subsystems design. - Coordinate multidisciplinary teams of specialists working on the systems and s/s design. - Systems and subsystems budgeting. - Requirements capturing & management from Stakeholder to equipment level. - AIV plan definition and execution with the support of the AIV team. - Support the systems test plan, procedures, and setup definition. - Authoring of Technical documents. Professional Experience: · We are interested in speaking to people with a minimum of five years of experience working in the field of Spacecraft design and development. Required Technical Skills: · Strong knowledge of Space Systems Engineering and Space Systems Architectures · Systems-level knowledge of all spacecraft subsystems · Experience in the definition of systems budgets and trade-off analyses · Experience in satellite verification and validation approaches · Experience in planning and management task · Experience in procurement processes · Experience in requirements management tools, e.g. DOORS or Jama; · Basic knowledge of software development and configuration management, e.g. GIT or Bitbucket; · Knowledge of Microsoft office Nice-to-have skills. · Experience in Institutional projects with ESA, ASI or other agencies. - Knowledge of ECSS/NASA standards. - Experience in Mission Analysis and usage of dedicated tools (e.g., STK, GMAT) - Working experience in space transportation and servicing applications. - Experience in carrying out tests in relevant space contexts (e.g., functional testing on EM, environmental test campaigns) - Experience in launch campaign activities and interfacing with launch providers. - Programming skills. - Experience in MBSE. Education - University degree preferably in the fields of Aerospace/Space Engineering. Language This role requires professional proficiency in English. At D-Orbit, diversity and inclusivity are not just values, they are integral to our mission and the way we operate. We are committed to fostering an environment where all individuals are respected, valued, and celebrated for their unique backgrounds, perspectives, and experiences. We believe that a diverse and inclusive workplace is not only the right thing to do, but it also leads to better decision-making, innovation, and overall success. We actively strive to build a culture where everyone can bring their authentic selves to work, and where all voices are heard and valued. We are dedicated to creating a workplace where everyone feels safe, supported, and empowered to share their ideas, and where everyone is given equal opportunities to grow and excel. We believe that our differences make us stronger, and we will continue to work diligently to create an inclusive culture at D-Orbit that reflects this belief. Settore: Industria aerospaziale Ruolo: Ingegneria/Progettazione Gestisce altre persone: Sì Tipo di occupazione: Contratto a tempo indeterminato Inquadramento: Impiegato
Vista prodotto

Como (Lombardia)
Ricercamy.com,the new recruiting company founded with the aim to rewrite the standards of the sector in Italy, is seeking a: JUNIOR PROJECT ENGINEER Our client is a multinational company in the automotive sector and ask us to search a JUNIOR PROJECT ENGINEER. Job description: ▪ Set up of project plan and independent planning, coordinating and completion of projects; ▪ Guiding the project team (Kick-off & regular team meetings) and ensure that each member completes the assigned tasks according to project plan; ▪ First point of contact to customer. Ensure customer satisfaction with open and proactive communication; ▪ Financial control of project. Ensure project is finalized with at least the precalculated margin; ▪ Management of changes in scope of delivery. Relate commercial changes to sales department; ▪ Responsible for regular project reporting. Skills: ▪ Completed education in business administration, business engineer, industrial engineer etc.; ▪ Further training in project management e.g. IPMA Level D or comparable; ▪ First experience in operational project management and project business (plant construction) and series business (automotive); ▪ Very good analytical skills and a cross-linked mindset; ▪ Effective und independent way of working; ▪ Hands-on-mentality and organizationally versed with a process-oriented mindset; ▪ Communicative, reliable, persistent and structured; ▪ Willingness to global travelling up to 25%; ▪ Languages: Business fluent in English, German is a plus Place of work: Provincia di Como “Ricercamy Srl is in possession of open-ended ministerial authorization n°39/0000225 granted by the Ministry of Labor and of PS in accordance with D. Lgs. 276/03”
Vista prodotto

Italia (Tutte le città)
La nostra azienda cliente appartiene ad un Gruppo Industriale operante nel settore metalmeccanico e nello specifico nella realizzazione di soluzioni per l’architettura destinate ad un mercato di fascia alta. L’azienda opera a livello internazionale e i suoi prodotti sono caratterizzati da un design che coniuga innovazione e uno stile made in Italy. In fase di potenziamento organico, ci ha incaricato di ricercare un: INDUSTRIAL ENGINEER che riporterà al Direttore Operations e sarà incaricato di guidare progetti di miglioramento continuo e ottimizzazione dei processi industriali attraverso l’applicazione delle strategie Lean e attività di analisi tempi e metodi. L’incarico prevede inoltre la gestione di progetti interaziendali all’interno del Gruppo tra i quali rientra anche la definizione e l’implementazione dell’assetto produttivo di uno stabilimento nel Nord Italia e la gestione del progetto fino all’avviamento degli impianti. Desideriamo incontrare candidati laureati in Ingegneria Meccanica o Industriale e che abbiano maturato esperienza in ruolo analogo nel settore metalmeccanico, preferibilmente nell’ambito delle lavorazioni meccaniche di precisione. Si richiede conoscenza della metodologia Lean Six Sigma, Tempi e Metodi, capacità di utilizzo di software CAD o altri tool di layout planning nonché di comunicare fluentemente in lingua inglese; costituirà requisito preferenziale la conoscenza della lingua tedesca. Attitudine al problem solving, capacità analitiche e comunicative, team work e disponibilità ad effettuare trasferte completano il profilo. Sede dell’azienda: provincia di Brescia. La ricerca è rivolta ad ambo i sessi. I dati personali saranno utilizzati per questa o altre selezioni. Prima di inviare il cv consultare informativa su modalità trattamento dati personali e diritti degli interessati presso il nostro sito.
Vista prodotto

Italia (Tutte le città)
La nostra azienda cliente appartiene ad un Gruppo Industriale operante nel settore metalmeccanico e nello specifico nella realizzazione di soluzioni per l’architettura destinate ad un mercato di fascia alta. L’azienda opera a livello internazionale e i suoi prodotti sono caratterizzati da un design che coniuga innovazione e uno stile made in Italy. In fase di potenziamento organico, ci ha incaricato di ricercare un: INDUSTRIAL ENGINEER che riporterà al Direttore Operations e sarà incaricato di guidare progetti di miglioramento continuo e ottimizzazione dei processi industriali attraverso l’applicazione delle strategie Lean e attività di analisi tempi e metodi. L’incarico prevede inoltre la gestione di progetti interaziendali all’interno del Gruppo. Desideriamo incontrare candidati laureati in Ingegneria Meccanica o Industriale e che abbiano maturato esperienza in ruolo analogo nel settore metalmeccanico, preferibilmente nell’ambito delle lavorazioni meccaniche di precisione. Si richiede conoscenza della metodologia Lean Six Sigma, Tempi e Metodi, capacità di utilizzo di software CAD o altri tool di layout planning nonché di comunicare fluentemente in lingua inglese; costituirà requisito preferenziale la conoscenza della lingua tedesca. Attitudine al problem solving, capacità analitiche e comunicative, team work e disponibilità ad effettuare trasferte completano il profilo. Sede dell’azienda: provincia di Brescia. La ricerca è rivolta ad ambo i sessi. I dati personali saranno utilizzati per questa o altre selezioni. Prima di inviare il cv consultare informativa su modalità trattamento dati personali e diritti degli interessati presso il nostro sito.
Vista prodotto

Italia
Allinterno della BU MEDICAL EQUIPMENT, realtà multibrand e multibusiness nei segmenti dentale e medicale, primo produttore europeo di attrezzature odontoiatriche, siamo alla ricerca di un* SUPPLIER QUALITY ENGINEER. Mission La risorsa avrà la responsabilità di assicurare che i fornitori rispettino gli standard di qualità dellazienda. Collaborerà strettamente con il team di acquisti, approvvigionamento, ingegneria e produzione per identificare, risolvere e prevenire problemi di qualità legati ai fornitori, promuovendo il miglioramento continuo dei processi di fornitura. Attività: - Valutare e qualificare nuovi fornitori secondo le specifiche di qualità aziendale - Effettuare visite regolari e audit presso i fornitori per garantire la conformità agli standard di qualità aziendale - Fornire supporto tecnico e formazione ai fornitori su metodologie di qualità - Condurre analisi approfondite sui fornitori e implementare azioni correttive e preventive - Monitorare le prestazioni dei fornitori utilizzando KPI e altri strumenti di valutazione della qualità - Mantenere una documentazione accurata e aggiornata relativa alla qualità dei fornitori, inclusi rapporti di audit, certificati di conformità e azioni correttive - Partecipazione agli incontri Campo Base per il monitoraggio e risoluzione dei problemi dal campo - Supporto per la definizione del Quality Agreement e per la gestione delle deroghe - Collaborare con i team di sviluppo prodotto per garantire che i nuovi fornitori siano qualificati e i loro processi produttivi siano conformi agli standard di qualità aziendali - Partecipare a revisioni tecniche e di progetto per fornire feedback sulle capacità e le prestazioni dei fornitori - Supportare le attività di PPAP (Production Part Approval Process) e APQP (Advanced Product Quality Planning) per nuovi prodotti e processi Requisiti: - Laurea in Ingegneria - Esperienza di almeno 5 anni nel medesimo ruolo in realtà industriale regolamentata - Conoscenza approfondita delle normative di qualità e degli standard del settore (es. ISO 9001, ISO 13485) - Competenza nelluso di strumenti di qualità come FMEA, PPAP, APQP - Conoscenza della metodologia 5S/8D/5W Sede di lavoro Imola Settore Manifatturiero Funzioni lavorative Supplier Quality Gli interessati ambosessi (L.903/77), possono inviare dettagliato curriculum, allegando lautorizzazione al trattamento dei dati personali ai sensi del Regolamento (UE) 2016/679 (Regolamento generale sulla protezione dei dati). La ricerca rispetta il d.lgs. 198/2006 ed è aperta a candidat* di qualsiasi orientamento o espressione di genere, orientamento sessuale, età, etnia e credo religioso. Il presente annuncio è stato ideato nel rispetto della diversity ed inclusion e della prassi UNI/PdR 125 in conformità della quale Cefla è certificata. #LI-DNI Settore: Industria metalmeccanica Ruolo: Controllo e certificazione qualità Tipo di occupazione: Contratto a tempo indeterminato
Vista prodotto

Italia
Cefla s.c. Allinterno della BU MEDICAL EQUIPMENT, realtà multibrand e multibusiness nei segmenti dentale e medicale, primo produttore europeo di attrezzature odontoiatriche, siamo alla ricerca di un* SUPPLIER QUALITY ENGINEER. Mission La risorsa avrà la responsabilità di assicurare che i fornitori rispettino gli standard di qualità dellazienda. Collaborerà strettamente con il team di acquisti, approvvigionamento, ingegneria e produzione per identificare, risolvere e prevenire problemi di qualità legati ai fornitori, promuovendo il miglioramento continuo dei processi di fornitura. Attività: - Valutare e qualificare nuovi fornitori secondo le specifiche di qualità aziendale - Effettuare visite regolari e audit presso i fornitori per garantire la conformità agli standard di qualità aziendale - Fornire supporto tecnico e formazione ai fornitori su metodologie di qualità - Condurre analisi approfondite sui fornitori e implementare azioni correttive e preventive - Monitorare le prestazioni dei fornitori utilizzando KPI e altri strumenti di valutazione della qualità - Mantenere una documentazione accurata e aggiornata relativa alla qualità dei fornitori, inclusi rapporti di audit, certificati di conformità e azioni correttive - Partecipazione agli incontri Campo Base per il monitoraggio e risoluzione dei problemi dal campo - Supporto per la definizione del Quality Agreement e per la gestione delle deroghe - Collaborare con i team di sviluppo prodotto per garantire che i nuovi fornitori siano qualificati e i loro processi produttivi siano conformi agli standard di qualità aziendali - Partecipare a revisioni tecniche e di progetto per fornire feedback sulle capacità e le prestazioni dei fornitori - Supportare le attività di PPAP (Production Part Approval Process) e APQP (Advanced Product Quality Planning) per nuovi prodotti e processi Requisiti: - Laurea in Ingegneria - Esperienza di almeno 5 anni nel medesimo ruolo in realtà industriale regolamentata - Conoscenza approfondita delle normative di qualità e degli standard del settore (es. ISO 9001, ISO 13485) - Competenza nelluso di strumenti di qualità come FMEA, PPAP, APQP - Conoscenza della metodologia 5S/8D/5W Sede di lavoro Imola Settore Manifatturiero Funzioni lavorative Supplier Quality Gli interessati ambosessi (L.903/77), possono inviare dettagliato curriculum, allegando lautorizzazione al trattamento dei dati personali ai sensi del Regolamento (UE) 2016/679 (Regolamento generale sulla protezione dei dati). La ricerca rispetta il d.lgs. 198/2006 ed è aperta a candidat* di qualsiasi orientamento o espressione di genere, orientamento sessuale, età, etnia e credo religioso. Il presente annuncio è stato ideato nel rispetto della diversity ed inclusion e della prassi UNI/PdR 125 in conformità della quale Cefla è certificata. Settore: Industria metalmeccanica Ruolo: Controllo e certificazione qualità Tipo di occupazione: Contratto a tempo indeterminato
Vista prodotto