Power dimensions

Marchio: Power Dynamics Categoria: Casse da installazione Diffusore da soffitto Hi-FI ad alta potenza Rete crossover elettronica integrata Griglia in alluminio metallica con chiusura magnetica Griglia sottile dell'altoparlante a basso profilo per una finitura elegante Diffusore coassiale a 2 vie Versione 8 Ohm Fornito singolarmente Colore: Bianco Output power: RMS 30W Diameter tweeter 1/2" Diameter woofer 6.5" Tweeter type Mylar Magnet type Ferrite Impedance 8 Ohm Frequency response 50Hz - 20.000Hz SPL @ 1W/1m 90dB Mounting depth 80mm Mounting diameter 190mm Dimensions (L x W x H) Ø215mm Weight 1,10

yamaha mx-50 natural stereo power amplifier tenuto in ottime condizioni estetiche e funzionali.... power output: 270 watt 8Ω (stereo) frequency response: 20hz to 20khz total harmonic distortion: 0.003% damping factor: 70 input sensitivity: 1.14v signal to noise ratio: 123db speaker load impedance: 4Ω to 16Ω dimensions: 435 x 170 x 425mm weight: 13kg

Power Bi-amp LF 250 W RMS Class-D HF 50 W RMS Class-AB Total Max power: 1200 W dynamic / 300 W RMS Frequency response: 60 Hz - 20 kHz Power supply: SMPS Dispersion (HxV): 90° x 60° Crossover frequency: 2,8 kHz Max SPL: 121 dB max. Woofer: 10" / 2"Voice coil Ø / 4 ohm / 250 W AES Tweeter: 1" compression / 8 ohm / 50 W RMS Input 1 COMBO XLR3-F/JACK mic/line input 1 RCA and mini Jack 3.5 stereo input Output: 1 XLR3-M line output Settings: Multiple settings DSP Protection: Short-circuit, thermal and limiter Construction and fastenings 2 monitor-specific angles (40°) 1 top handle 2 M10 rigging points (on top) 1 insert M10 derrière 36 mm dual positions mounting plate for a speaker stand (0° and 7,5°) Dimensions: 531 x 310 x 300mm NetWeight: 11.3 kg

Power output: 110 watts per channel into 8Ω (stereo) Frequency response: 5Hz to 200kHz Total harmonic distortion: 0.003% Damping factor: 60 Input sensitivity: 0.1mV (MC), 2.5mV (MM), 150mV (line)Signal to noise ratio: 74dB (MC), 90dB (MM), 110dB (line) Output: 150mV (line) Speaker load impedance: 4Ω to 16Ω Dimensions: 420 x 150 x 430mm Weight: 16kg Year: 1980 Valutiamo permute Spedizioni in tutto il mondo

Power output: 120 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.002% Damping factor: 130 Input sensitivity: 1.07V Signal to noise ratio: 127dB Speaker load impedance: 4Ω to 8Ω Dimensions: 435 x 165 x 425mm Weight: 14kg Year: 1984 Spedizioni in tutto il mondo Valutiamo permute

Marchio: Beamz Categoria: Luci Motorizzate Beam, spot e wash light in un unico dispositivo LED ad alta intensità da 300W Ruota gobo 1: 2 gobo in vetro e 5 gobo in metallo + aperto (intercambiabile) Gobo Wheel 2: 9 gobo fissi + aperti (colori divisi) Funzioni gobo: gobo shake, rotazione gobo ed effetto arcobaleno 3 ruote effetto con velocità e direzione di rotazione regolabili Prismi ruotabili a 3 e 8 sfaccettature (possono essere sovrapposti) Zoom lineare motorizzato 20 canali DMX DMX, attivazione del suono, modalità master/slave e stand-alone Dimmer elettronico 0-100%. Correzione automatica pan/tilt Telecomando RDM, trasmissione dati bidirezionale Ingresso/uscita DMX tramite XLR a 3 e 5 pin Ingresso/uscita connettore di alimentazione Morsetto omega a chiusura rapida incluso DMX e cavo di alimentazione incluso Flightcase solido su ruote Light source Single colour LED LED colours White LED power 300W Colour wheel 8 colours + open Beam angle: Min7° Beam angle: Max32° ZoomYes Illuminance 197.822 lx @ 1m Head movement: Pan 540°/270°/180° Head movement: Tilt270°/180°/90° Static gobo: Quantity 9 fixed Rotating gobos: Quantity 2 glass and 5 metal Gobo shakeYes Interchangeable gobos Yes Gobo dimensions 26mm Prisma 13 Facet Prisma 28 Facet Frost filter Yes Flash rate per second 0 - 20Hz Modes Automatic programs, DMX, Manual, Master/Slave RDM Yes DMX channels 20 DMX connector 3-pin XLR, 5-pin XLR Display LCD IP rating IP20 Cooling Temperature controlled fan Power plug Power-connector Power consumption 3.73 - 1.74A Power supply 100-240VAC 50/60Hz Dimensions (L x W x H)370 x 230 x 530mm Dimensions: Flightcase830 x 420 x 620mm Weight58,85 Weight: Each15.6 Accessories DMX cable, Mounting bracket, Power cable PL02049.6700

LD SYSTEM MEI 100 EAR MONITOR: Praticamente NUOVO, utilizzato 2 volte, vendesi per inutilizzo. Specifications MEI 100 BPR Receiver: Article No.: LDMEI100BPR Frequency range: 838 MHz to 865 MHz Image rejection: > 60 dB S/N ratio: > 95 dB THD: 90 dB, A-weighted Dimensions: 95 mm x 65 mm x 25 mm Weight: 0.57 kg Power requirements: 2 AA batteries Battery life: > 8 hours (depending on battery type) Specifications MEI 100 T Transmitter: Article No.: LDMEI100T Frequency range: 838 MHz to 865 MHz RF output power: 10 dBm Gain adjustment range: 20 dB Max. audio input level: +12 dBV Front panel controls: Power, Set, Up and Down, Headphone volume control Rear panel controls: Input level left/right, Stereo/Mono switch Input: Neutrik COMBO balanced (left/right) Dimensions: 212 mm x 90 mm x 38 mm Weight: 0.85 kg Power requirements: 12 V to 18 V at 300 mA, supplied by external power supply

Vendo flash SEACAM SEAFLASH 150D x Nikon + n° 2 pacchi batterie + Carica batterie e carica batt. per auto + cavo sincro S6 + testa sfera M8 + protezione in neoprene. Dati Flash: Luce pilota 2 livelli di potenza Nikon i-TTL, Dual- TTL, Film TTL and manual power adjustment in 7+5 steps. Power 150 Ws / 4400 K°, uw-guide no. 14 at 100 ISO / 1m full power. Illumination 130°   200 flashes with max. power, delay time 0,1 –2 sec.   Dimensions (L x Ø): 190 x 100 (90)mm   Dimensions battery pack (L x Ø): 135 x 40mm     Weight: 1300 g, under water –50g.     Operation depth: - 80m Tutto in perfetto stato, usato poco, mai allagato e con contatti elettrici integri. Vendo per cambio attrezzatura Prezzo 1350,oo. Per tutelare sia l'acquirente che il venditore, il pagamento sarà in contrassegno, se spedito.

SEACAM 150D Flash subacqueo Usato prezzo EUR.1.250,00 SEACAM SEAFLASH 150D x Nikon, usato Vendo flash SEACAM SEAFLASH 150D x Nikon + n° 2 pacchi batterie + Carica batterie e carica batt. per auto + cavo sincro S6 + testa sfera M8 + protezione in neoprene. Dati Flash: Luce pilota 2 livelli di potenza Nikon i-TTL, Dual- TTL, Film TTL and manual power adjustment in 7+5 steps. Power 150 Ws / 4400 K°, uw-guide no. 14 at 100 ISO / 1m full power. Illumination 130° 200 flashes with max. power, delay time 0, 1 ?2 sec. Dimensions (L x Ø): 190 x 100 (90)mm Dimensions battery pack (L x Ø): 135 x 40mm Weight: 1300 g, under water ?50g. Operation depth: - 80m Tutto in perfetto stato, usato poco, mai allagato e con contatti elettrici integri. Vendo per cambio attrezzatura Prezzo 1250, oo. Per tutelare sia l'acquirente che il venditore, il pagamento sarà in contrassegno, se spedito tramite Roma (RM)

SEACAM 150D Flash subacqueo Usato prezzo EUR.1.200,00 SEACAM SEAFLASH 150D x Nikon, usato Vendo flash SEACAM SEAFLASH 150D x Nikon + n° 2 pacchi batterie + Carica batterie e carica batt. per auto + cavo sincro S6 + testa sfera M8 + protezione in neoprene. Dati Flash: Luce pilota 2 livelli di potenza Nikon i-TTL, Dual- TTL, Film TTL and manual power adjustment in 7+5 steps. Power 150 Ws / 4400 K°, uw-guide no. 14 at 100 ISO / 1m full power. Illumination 130° 200 flashes with max. power, delay time 0, 1 ?2 sec. Dimensions (L x Ø): 190 x 100 (90)mm Dimensions battery pack (L x Ø): 135 x 40mm Weight: 1300 g, under water ?50g. Operation depth: - 80m Tutto in perfetto stato, usato poco, mai allagato e con contatti elettrici integri. Vendo per cambio attrezzatura Prezzo 1250, oo. Per tutelare sia l'acquirente che il venditore, il pagamento sarà in contrassegno, se spedito tramite Roma (RM)

SEACAM 150D Flash subacqueo SEACAM Usato prezzo EUR.1.200,00 SEACAM SEAFLASH 150D x Nikon, usato flash subacqueo + n° 2 pacchi batterie + Carica batterie e carica batt. per auto + cavo sincro S6 + testa sfera M8 + protezione in neoprene. Dati Flash: Luce pilota 2 livelli di potenza Nikon i-TTL, Dual- TTL, Film TTL and manual power adjustment in 7+5 steps. Power 150 Ws / 4400 K°, uw-guide no. 14 at 100 ISO / 1m full power. Illumination 130° 200 flashes with max. power, delay time 0, 1 ?2 sec. Dimensions (L x Ø): 190 x 100 (90)mm Dimensions battery pack (L x Ø): 135 x 40mm Weight: 1300 g, under water ?50g. Operation depth: - 80m Tutto in perfetto stato, usato poco, mai allagato e con contatti elettrici integri. Vendo per cambio attrezzatura Prezzo 1250, oo. Per tutelare sia l'acquirente che il venditore, il pagamento sarà in contrassegno, se spedito tramite Roma (RM)

EURO 89,00 SPEDIZIONE INCLUSA. Radiomicrofono WORK PRO UHF WRD 1100 AF/1 assolutamente nuovo, mai usato ancora imballato disponibile per essere visionato e provato. Sono a disposizione, non esitate a contattarmi rispondendo direttamente alla e-mail solo se veramente interessati. Non sono interessato a scambi o permute di materiale. Grazie. CARATTERISTICHE: WRD 1100 AFʉ۬System: AFS single channel Diversity.
Frequency Band: UHF.
Number of channels: 99 selectable channels.
Dynamic Range:> 95 dB.
Output Level: 400 mV (Balanced), 400 mV (unbalanced).
S / N:> 95 dB.
De-Emphasis: 50 uS.
Power supply: 15-17V DC (External power supply included).
Dimensions: 210 x 170 x 44 mm.
Weight: 700 g.
WM 1100 AFʉ۬Transmission power: 30mW.ʉ۬Modulation Type: FM.ʉ۬Deviation: 40 kHz.ʉ۬Spurious Emissions:> 60 dB.ʉ۬Power supply: 3V (2 x 1.5V AA batteries).ʉ۬Dimensions: 250 x 30 mm.ʉ۬Weight: 200 g.

Marchio: Rondson Categoria: Microfoni Senza Filo Palmari Four Channel Wireless Handheld Microphone System; PLL synthesizer; UHF Frequency Range: 669.1/655.0/676.6/663.0 MHz easy-to-read LCD displays; 50 mt. in open areas; Modulation Type: FM; Frequency Deviation: +/- 22 kHz; Frequency Response: 50-15.000 Hz; Frequency Stability: +/- 10 ppm; Interference Rate: b'>' 50dB; S/N Ratio: b'>' 90dB; Sensitivity: - 80 dBuV; Distortion: b' Output Impedance: 600 ohm; Audio Output Level: - 400 mV (balanced/unbalanced); Output connectors: 4x XLR-3M, 1x Jack TRS 6,3mm; Antenna connectors: 2x BNC; Receiver BE-1040: dimensions: 480x180x46 mm, weight: 3,5 kg, power: 110-240V / 12 V 1000 m A, consumption: b' Transmitters BE-1040MIC: dimensions: 240x50x33mm, RF Power: 10 mW, power supply: 2x 1,5V AA.

Hardware features 20 playback faders - 10 macro / executor buttons Schermo touchscreen da 15,6" ad alta luminosità Superficie di controllo espandibile con l'opzionale Tiger Touch Fader Wing 3 encoder ottici di alta qualità Supporta uno schermo aggiuntivo Sicurezza Avokey integrata UPS integrato Software Software platform: Avolites Titan DMX channels per device: 8192 max. DMX channels per system: 32,768 3D Visualisation: capture engine built in Max. fixtures: unlimited Keyframe effect engine: custom effects with any number of keyframes Pixel mapping: animation based, video via Synergy External control: Web API, MIDI, DMX, sACN Titan Net: multi-user with any Titan console Output formats: Art-Net, sACN, or DMX-512 OS: Microsoft Windows 10 Enterprise Connectivity DMX-512: 4 x Neutrik 5-pin XLR, optically isolated Network: 2 x 1 Gb Ethernet connections Mains power: IEC Data / peripherals: 4 x USB 2.0 plus 1 x USB 2.0 front-mounted External display: Display Port and DVI (one active output only) MIDI: IN b'&' OUT 5-pin DIN SMPTE: 3-pin XLR Switch trigger: 1/4" jack Physical specifications Power consumption: 80 W Power specification: 110 - 240 V AC 50/60 Hz Heat output: 272.8 BTU/hr Operating environment ambient temp: 0 to 40 °C Max humidity 95% relative noncondensing Internal UPS 5 separate 5-minute periods, fully software integrated Unit dimensions (W x D x H): 674 x 435 x 147 mm Weight: 15.2 kg Flight case dimensions: 750 x 620 x 300 mm Weight in flight case: 29.4 kg

Marchio: Definitive Audio Categoria: Sistemi a Colonna e Line Array Passive wide band column Speakers: 12 x 2,75’’ wide band Line Array Output power: 200 WRMS Frequency response: 200 Hz – 20 kHz SPL: 120 dB Impedance: 8 ohms Cabinet: aluminium Grid: 1 mm steel Cover included Dimensions: 1040 x 240 x 220 mm Weight: 7 kg Active vented subwoofer equipped with DSP Amplifier circuit: Class-D Speakers: 2 x 10’’ with 2.5’’ voice-coil 450Z RMS power: 500 W (Sub) + 250 W (Sat) Frequency response: 50 Hz – 200 Hz SPL: 121 dB Inputs: Combo (XLR / jack 6.35 mm) Outputs: balanced XLR, XLR link for VORTICE 210SA subwoofer and speakON for VORTICE columns Volume adjustment knob Sensitivity adjustment button: +4/-10 dBu DSP: 3 positions depending on the number of columns and boxes Compressor: excellent workmanship and operation Cabinet: high quality plywood Finishing: high resistance black paint Grid: 1.2 mm steel Power supply: 115 - 230 V∿ – 50/60 Hz switchable voltage indicator: LED Dimensions: 585 x 455 x 755 mm Weight: 23.5 kg

Marchio: Audiophony Categoria: Finali di potenza Class-D amplifier Switched-mode power supply Mode selection: Stereo, Bridge or Parallel Independent limiter for each channel Extremely accurate and independent level settings for each channel LEDs indicators Convection cooled Balanced Jack TRS and XLR inputs Unbalanced RCA outputs Binding post-jacks or speakON outputs Short-circuit, over current and high temperature independent protections for each channel 2x19" rack mount spaces Stereo Max power: 4 Ω RMS stereo power (minimum): 2 x 150 W RMS; 8 Ω RMS stereo power: 2 x 80 W RMS Mono bridged Max power: 8 Ω bridged power (minimum): 1 x 300 W RMS Signal-to-noise ratio Less than 90 dB Input sensitivity: 4 dBu +/-2 dB Distortion: THD at 1 kHz 1/2 rated power Less than 0.1%; Slew rate: - 65 dB at 1 kHz; Frequency response (4 Ω/1 W): +0.5 dB; 20 Hz-20 kHz Input impedance: unbalanced 15 kΩ / Balance 30 kΩ Clip: 0 dBr Cooling: Convection cooled Input connectors: XLR3-F, Balanced 6.35 mm TRS-F jack + Unbalanced RCA Output connectors: Binding post-jacks + 4-pole speakON® Front control panel: AC power switch, Channel 1 and 2Volume Rear control panel: Mode selection button Indicators: Protect (red) / Clip (yellow) / Signal (green) Protections: Short-circuits, over current and high temperature protected Power supply: 100/230 V AC - 50/60 Hz Dimensions: 482 mm x 44 mm x 330 mm NetWeight: 4.3 kg

1400W + 700W – 137DB SPL ACTIVE PRECISION COVERAGE VERTICAL ARRAY 2-way powered bi-amplified true line array, bass reflex design, internal Digital Signal Processor 1400Wrms LF and 700Wrms HF Class D (PWM) high efficiency integrated amplifier 8 woofer custom al neodimio da 200mm (8’’)50 mm voice coil (2”) 8 x 25 mm (1”) custom neodymium compression drivers and 44 mm voice coil (1.7”) 8 polypropylene waveguide horns with 90° horizontal dispersion 15° vertical dispersion On-board presets allow different equalization configurations, gain and digital delay through the rear control panel Specifications Configuration way: 2 Built-in amplifiers LF/HF (Wrms): 1400/700 Frequency response (-6dB): 58Hz – 18kHz Low frequency woofer (inch): 8 x 8 – 2 coil – neodymium High frequency driver (inch): 8 x 1 – 1,7 coil – neodymium Sensitivity (1W/1m): 105 dB Maximum SPL: 137 dB Dispersion (H x V): 90° x 15° Input impedance (kohm): 22 Crossover frequency (kHz): 1,2 AC Power requirements (VA): 1400 Input connectors: XLR with loop Power cord: 5 / 16,4” (m/ft) Net dimensions (WxHxD – single unit): 713x980x460 / 28,1×38,6×19,3 (mm / inch) Net weight (kg/Lb): 93 / 205,02 Transport dimensions (WxHxD – 2 units on pallet): 750x1400x1100 / 29,5×55,1×43,3 (mm / inch) Transport weight (2 units on pallet): 210 / 462,97 (kg/Lb) PRODOTTO USATO: CONDIZIONI OTTIME

Column Power 180 W RMS - 360 W max. Nominal impedance 6 ohm Boomer: 6 x 3" Tweeter: 1 x 1" Dispersion: 120° x 30° (H x V) Connector: slot-in integrated into the subwoofer Dimensions: 103 x 750 x 100 mm x 2 Net weight: column 3.75 kg / spacer: 2.1 kg Subwoofer Power: 250 W RMS - 500 W max. Nominal impedance: 4 ohm Woofer: 1 x 10" Dimensions: 389 x 626 x 626 mm Net weight: 21.8 kg Complete system Frequency response: 38 Hz - 18 kHz Max. SPL (@ 1m): 122 dB Amplifier module Low frequencies 1 x 300 W RMS / 600 W max Mid/High frequencies 1 x 300 W RMS / 600 W max

Satellite Power: 400 W RMS - 800 W max. Nominal impedance: 4 ohm Woofer: 3 x 8" neodymium Tweeter: 12 x 1" Dispersion: 100° x 70° (H x V) (-10 dB) Dimensions: 255 x 695 x 400 mm Net weight: 11.5 kg Subwoofer Power: 700 W RMS - 1400 W max. Nominal impedance: 4 ohm Woofer: 1 x 15" Dimensions: 483 x 725 x 585 mm Net weight: 36.5 kg Satellite + subwoofer Frequency response: 35 - 18,000 Hz SPL max. (@ 1 m): 128 dB Amplification Low stage: 1 x 700 W RMS / 1400 W max. at 4 ohm Mid/high stage: 1 x 400 W RMS / 800 W max at 4 ohm Level: level adjustment on each channel + master Sub: adjustment of the level of the box Inputs CH1: 1 x XLR Combo / line jack / MIC CH2: 1 x XLR / line jack / MIC Combo CH3: 1 x line jack CH4/5: 1 x RCA L/R line + Bluetooth input Input impedances MIC 1/2: balanced 40 kohm Line 1/2: symmetrical 10 kohm Line 3: symmetrical 20 kohm Line 4/5: asymmetrical 5 kohm Outputs 1 x insert on top of the satellite box 1 x XLR MIX OUT balanced for output to another system 2 x XLR LINE OUT symmetrical for repique CH1 and 2 DSP 24 bit (1 in 2 out) EQ / presets / low cut / delay / Bluetooth TWS

Marchio: Laserworld Categoria: Luci Laser Total Power: 12'000 m W Guaranteed Power: 11'000 m W Power Red: 2'600 m W / 638 nm Power Green: 2'900 m W / 520 nm Power Blue: 5'500 m W / 450 nm Beam Specifications*: 5 mm / 1.2 mrad Scanner: 28kpps @ 8° ILD A, galvo system, switchable effects grating wheel Max. Scan Angle: 40°, up to 90° with effects gratings Laser Source: Diode Laser Class: 4 Operation Modes: stand-alone, sound-to-light, DMX, ILD A, master-slave, Grating Basic Patterns: ca. 130 (layers, tunnels, fences, waves, etc.), effects gratings Accessories: power cable, manual, interlock, key IP rating: IP4X Power supply: 85V - 250 V AC Power Consumption: 200 W Dimensions: 285 x 180 x 190 mm Weight: 7.7 kg

Marchio: Audiophony Categoria: Finali di potenza Output power: 240 W RMS Max powers / Impedance: 100 V (42 ohm); 70 V (21 ohm); 4 ohm (31 V) XLR balanced input XLR balanced output Max power terminal 24 V DC Input terminal Input sensitivity: 1.0 V (adjustable) Input impedance: 10 k ohm (balanced) Frequency response: 70 Hz - 18 kHz (+/-3 dB) T.H.D (1 kHz, 1/2 nominal power): b' Signal to noise ratio: 90 dB Ground Li ft power switch Filtre Passe haut 400 Hz activable par switch Power supply: 100 - 240 V, 50/60 Hz, AC; 24 V, DC (safe power supply) Protections: Short-circuits, Thermal, Overcharge Power consumption: 361 W Mountable in 19" rack Height: 2 units Dimensions (L x H x D): 482 x 88 x 330 mm NetWeight: 13.8 kg

Marchio: Beamz Categoria: Barre LED Luce Wash compatta Classificazione IP65, per uso interno ed esterno Robusto alloggiamento in alluminio 54 LED da 1 W Angolo del fascio 60° x 10° Miscelazione dei colori RGB Canali DMX: 3/5/8/13 Funzione RDM Spettacoli pre-programmati Nessuna ventola, raffreddamento a convezione tramite alette di raffreddamento Dimmer elettronico 0-100% Colore: nero Pannello di controllo con display O-LED Connettori impermeabili Per uso architettonico e di intrattenimento Staffa Omega inclusa LED colours Red, Green, Blue LED power 1W Quantity of LEDs 54 Beam angle 60° x 10° Illuminance 18.685 lx @ 0.5m Flash rate per second 1 - 20Hz DMX channels3, 5, 8, 13 ModesAutomatic programs, DMX, Manual, Master/Slave IP rating IP65 Cooling Convection Display oLed Power plug Fixed power lead Power consumption 0.44 - 0.222A Power supply100-240VAC 50/60Hz Dimensions (L x W x H)426 x 53 x 90mm Weight2,65 Accessories DMX cable, Mounting bracket, Power cable, Remote control

Marchio: Beamz Categoria: Barre LED 36x 3W Bianco Caldo LED con angolo di apertura 5° 216x SMD RGB LEDs (backlight) Controllo a singolo Pixel Protocolli RDM/DMX Programmi integrati Operazioni ultra silenziose, sistema di raffreddamento a convezione naturale Agganci rapidi per la creazione di un sistema modulare Display a colori O-LED Dimmer Elettronico: 0 - 100% Connessione PowerCon TR input/output Light source: Single colour LED, 3-in-1 LED LED colours: Red, Green, Blue, Warm White LED power: 3 Quantity of LEDs: 36 LED power: Backlight SMD Quantity of backlight: LEDs 216 Beam angle: 5 Field angle: 10 Illuminance: 15000 lx @ 1m Flash rate per second: 0 - 20Hz DMX channels: 8, 144 DMX connector: 3-pin XLR Modes: Automatic programs, DMX, Manual, Master/Slave Cooling: Convection Power plug: Power-connector Power consumption: 1.8 - 0.9A Power supply: 110-250VAC 50/60Hz Dimensions (L x W x H): 500 x 500 x 80mm Weight: 6,70 Accessories Mounting bracket, Power cable

Amplificatore di potenza inglese AMC 2445,dual mono,come nuovo,usato molto poco ed originale in tutto,mai stato riparato. Dichiara una potenza in uscita di 90 w/ch,ed una bassissima distorsione.Timbrica molto corretta,dettagliata,non affaticante e basse molto controllate.Vendo a 240 euro,preferibilmente dopo ascolto a casa mia,ma posso anche spedire. No scambi,ne’ richieste impossibili,grazie. Date uno sguardo anche agli altri miei annunci, Weltronics Corp. reserved the right to improve its products at any time. Specifications are subject to change without notice. 2CHANNELMODE 4 CHANNEL MODE Power output into 8 ohms (20Hz~20KHz) ..............................................................90W With both channels driven Rated THD. .......................................................................................................0.03% 1KHz clipping power into 8 ohm ........................................................................100W Damping factor ....................................................................................................100 Input sensitivity for 1W/90W into 8 ohm ................................................91mV/866mV Power output into 4 ohms (20Hz-20KHz) .......................................................... ..45W With all channels driven Rated THD. .......................................................................................................0.05% 1KHz clipping power into 4 ohm ..........................................................................50W Damping factor ....................................................................................................100 Input sensitivity for 1W/45W into 4 ohms ............................................130mV/866mV Input impedance ................................................................................R=10K C=200pf Frequency response 20Hz~20KHz ................................................................+/-0.5dB "A" WTD. singal to noise ratio (ref. 1W/8 ohms) ...............................................100dB Dimensions (WxHxD) .......................................................................430x112x288mm Net weight ...........................................................................................................9.5kg Shipping weight ................................................................................................10.5kg Power consumption ............................................................................................360W

Vendo Amplificatore Car Stereo Harman Kardon CA 260 usato pochissimo. Caratteristiche Tecniche: Power Output, RMS 60 watts per channel into 4 Ohms, 20 - 20,000Hz: 90 watts per channel into 2 Ohms, 20 - 20.000Hz: 180 watts bridged mono into 4 Ohms, 20- 20,000Hz HCC (High Instantaneous Current. +/-30A Capability) THD (4 Ohms/2 Ohms): No more than 0.1 %10.2% Negative Feedback: 25dB Power Bandwidth. 10Hz to 100,000Hz Frequency Response 10Hz to 100,000Hz + 0, - 3dB Signal-to-Noise Ratio: 80dB lnput Sensitivity Line Level: 0.1V10.5V (switchable) High Level: 1V Active Crossover Characteristics High Pass. 200Hz, 12dB/Octave Low Pass: 200Hz, 6dB/Octave Power Supply. DC +13.8V (11 -16V usable), negative ground Typical lnput Current Requirements At Idle. 2.5A Full Power MUSIC Signal 6 7A (4 Ohms/ch.) 10A (2 Ohms/ch.) Full Power Sine Wave. 20A (4 Ohms/ch.) 30A (2 Ohms/ch.) Dimensions (W x H x D). 15-518" x 3-718'' x 7-1/8" (396 x 98 x 180mm) Weight. 1Olbs. 202. 14.6kgl

Subwoofer Ciare CW320C serie Cobalt ''profondità oceaniche'', ex top di gamma, solo il famoso colore blu del cono non è più lo stesso a causa del tempo; con i suoi 95db di sensibilità è immediatamente presente anche con pochi watt applicati mentre con 300w rms vi massaggia gratuitamente. Completo di griglia di protezione e morsettiera con contatti dorati. Scorrete le immagini e troverete anche le caratteristiche tecniche. L'amplificatore che alimenta il sub è un Alpine MRV-T500 della serie V12 appunto da 300w rms in bridge, ecco le specifiche complete: Power Output: Dynamic Power (at 14.4V, 20-20kHz) MRV-T500 (CH-1 - CH-2) Per channel into 4 ohms...75W x 2 rms (0.08% THD) Per channel into 2 ohms...150W x 2 rms (0.3% THD) Bridged 1 Channel into 4ohms.....300W x 1 rms (0.3% THD) Frequency Response.... 10Hz to 50kHz (±0, -1 dB) Signal-to-Noise Ratio.... 100dBA(referenced to rated power) Input Sensitivity (for rated power) Line inputs.... 200mV-4V (500mV at detent)....(1.0V at center) Slew Factor... Greater than 5 Input impedance....10k ohms Speaker Impedance....4 or 2ohms (stereo) or 4ohms mono 4 ohms (Bridged) Dividing Network Frequency and Slope....50-200Hz...12dB/Octave Slope Power Requirement.... 11 - 16V DC Negative Ground Dimensions (W x H x D) MRV-T500... 240mm x 53mm x 250mm) Weight MRV-T500.... 5.3 kg (11 lbs. 10 oz) Tutto perfettamente funzionante, chiedete pure per ulteriori informazioni e foto, anche vendibili separatamente. Posso eventualmente spedire con corriere espresso.

Marchio: Beamz Categoria: Par e Wash LED 1 LED COB RGBW da 150W CRI b'>'98 Angolo del fascio 25° (o 60° con il filtro diffusore extra) Modalità DMX e stand-alone 3, 4, 5 o 10 canali DMX Funzione master/slave Modalità automatica 4 show pre-programmati Ingresso/uscita DMX tramite XLR a 3 pin Ingresso/uscita connettore di alimentazione Pannello di controllo con display a LED La doppia staffa funge anche da supporto da pavimento Compreso il telecomando Supplied features Master/Slave mode Light source 4-in-1 LED LED colours Red, Green, Blue, White LED power 150W Color Rendering Index (CRI) b'>'98 Colour temperature 1800K - 8000K Quantity of LEDs 1 Beam angle 25° Field angle 50° Illuminance 11.013 lx @ 1m Flash rate per second 0 - 20Hz DMX channels 3, 4, 5, 10 DMX connector 3-pin XLR Modes Automatic programs, DMX, Manual, Master/Slave IP rating IP20 Cooling Convection Display LCD Power plug Power-connector Power consumption 2.09 - 1.15A Power supply 100-240VAC 50/60Hz Dimensions (L x W x H) 220 x 190 x 190mm (220 x 350 x 190 with bracket) Weight 3,85 Accessories Mounting bracket, Power cable, Remote control

Marchio: Beamz Categoria: Par e Wash LED 1 LED COB WW da 150 W CRI b'>'98 Angolo del fascio 25; (o 60° con il filtro extra diffusore) Modalità DMX e stand-alone 1, 2 o 4 canali DMX Funzione master/slave Modalità automatica 4 show pre-programmati Ingresso/uscita DMX tramite XLR a 3 pin Ingresso/uscita PowerConnector Pannello di controllo con display a LED La doppia staffa funge anche da supporto da pavimento Compreso il telecomando Supplied features Master/Slave mode Light source Single colour LED LED colours Warm White LED power 150W Color Rendering Index (CRI) b'>'98 Colour temperature 3000K Quantity of LEDs 1 Beam angle 25° Field angle 50° Illuminance 11.182 lx @ 1m Flash rate per second 0 - 20Hz DMX channels 1, 2, 4 DMX connector 3-pin XLR Modes Automatic programs, DMX, Manual, Master/Slave IP rating IP20 Cooling Convection Display LCD Power plug Power-connector Power consumption 2.09 - 1.15A Power supply 100-240VAC 50/60Hz Dimensions (L x W x H) 220 x 190 x 190mm (220 x 350 x 190 with bracket) Weight 3,85 Accessories Mounting bracket, Power cable, Remote control

Marchio: Beamz Categoria: Luci Strobo ed Accecatori Strobo/wash ibrido con intervallo di inclinazione motorizzato di 180° 96 LED bianco freddo da 10 W controllati in 12 sezioni 864 LED SMD RGB da 0,5 W controllati in 96 sezioni Zone pixel-mappabili Miscelazione dei colori RGB + bianco freddo DMX512, stand alone e modalità Master/slave 6 diverse modalità di canale DMX Funzionalità di controllo DMX (RDM) e ArtNet Programmi automatici e spettacoli pre-programmati Velocità regolabile Pannello di controllo con display LCD e blocco tasti Impermeabile IP65 per uso esterno Dimmerazione: 0 - 100% dimmerazione a 16 bit Varie curve dimmer regolabili Ingresso/uscita P-ConTR1 Product colourBlack Light sourceSingle colour LED, 4-in-1 LED LED coloursRed, Green, Blue, White, Cool White LED power (single LED)40W Quantity of LEDs14 LED power: Strobe10W Quantity of strobe LEDs96 Beam angleBeam 110°, Pixel 6° Illuminance97.675 lx @ 1m (Strobe 115.940 lx @ 0,5m) IP ratingIP65 DMX channels14, 25, 78, 94 DMX connectionART-Net, 3-pin XLR, 5-pin XLR, RJ45 Flash rate per second1 - 31Hz Head movement: Tilt180° ModesAutomatic programs, DMX, Master/Slave Power consumption6.38 - 3.03A Power supply100-240VAC 50/60Hz Included accessoriesMounting bracket Dimensions (L x W x H)185 x 420 x 390mm Weight21,85

Marchio: Beamz Categoria: Luci Strobo ed Accecatori COB LEDs 4x 85W/20W Luce bianca calda / ambra 2-in-1: Accecatore e strobo Chassis robusto in alluminio pressofuso Pannello di controllo con 4 pulsanti e Display menu a LED Modalità DMX/RDM e Stand-alone 1, 2, 3 or 5 canali DMX Funzione Master/slave Attivazione sonora con sensibilità regolabile Modalità automatica con velocità regolabile Connettori DMX e PowerCon TR In/Out con protezione IP65 Staffa Quick Lock per diversi metodi di montaggio Product colourBlack Light source 2-in-1 LED LED colours Amber, White LED power (single LED) 100W Quantity of LEDs 2 Beam angle 48° Field angle 74° Illuminance 17.300 lx @ 1m Flash rate per second 1 - 25Hz DMX channels 1, 3, 4, 8 DMX connection 3-pin XLR, 5-pin XLR Modes Automatic programs, DMX, Manual, Master/Slave IP rating IP65 Cooling Convection Display LED Power consumption 2.56 - 1.4A Power supply 100-240VAC 50/60Hz Dimensions (L x W x H) 405 x 200 x 310mm Weight 7,60 Included accessories Mounting bracket, Power cable