Rubber coated
Elenco delle migliori vendite rubber coated

Italia (Tutte le città)
AB Inflatables Lammina 9.5 AL - ORCA CSM / Hypalon (Boat Only)Amazingly tough and lightWhen a full-sized, but light, hard-bottomed open tender is needed, the Lammina AL excels. The amazingly tough RIB features an aluminium hull for weight reduction and rugged durability.Features:
Large Square Transom Aluminium Reinforced Base
More Payload Capacity
More Internal Area
Aluminium Removable Rowing Seat
New Chrome Free - Advanced Pre-treatment and Powder Coating Technology
Ultra High Quality Welding
Bow U bolt and lateral towing eyes
Single Solid Rubrail
New Heavy Duty Keel Protector
/"V/" Hull
ORCA (CSM) Coated Fabric
Sunbrella Fabric Dinghy Chap Available
Sunbrella Fabric Boat Cover Available
Reinforced Aluminium Lifting Eyes with SS Rings
Internal Aluminium Plate with Security Lip
Reinforced (CSM) Fabric Handles
Non-skid Rubber Floor
Reinforced Aluminium Transom Towing Eyes w/ SS Rings
Reinforced Aluminium Transom Tie Downs w/ SS Rings
Specifications:
Overall length: 9' 6/" / 2.90 m
Overall Beam: 5' 6 /" / 1.68m
Inside Length: 6' 11/"/2.11 m
Inside Beam: 2' 6/" / 0.76m
Tube Diameter: 17/" / 0.43m
Number of Chambers: 3
Person Capacity: 5
Weight: 95lb / 43kg
Recommended HP: 8 hp/ 6.0 kw
Maximum HP: 15 hp / 11.2kw
Shaft length: 15/" / 38.1 cm
RDC Design Category: C
Hull Thickness 0.090 in / 2.28mm
Standard Equipment:
Deep “V” Marine Grade Aluminium Hull
Heavy Duty Transom Knee
Stringer System Welded Under Aluminium Deck
Non-Skid Rubber Floor Panels
Plastic External Transom Plate
Aluminium Internal Transom Plate with Security Lip
Aluminium Bow Eye
3-4 Aluminium Davit Lifting Points
Aluminium Transom Tie Down b'&' Towing Rings
Deck Drain with Plug
Orca (CSM) Five Layer Coated Fabric
Raised Single Rub Rail
Push Push Plastic Non-Corrosive 2 Stage Inflation Valves
1 Front b'&' 2 Side Orca (CSM) Fabric Handles on Tubes
2 Inside Bow Sets of Double Orca (CSM) Fabric Handles on Tubes
2 Inside Stern Single Orca (CSM) Fabric Handles on Tubes
Removable Rowing Seat
Oarlock Base
Telescopic Oars with Aluminium Shaft
Paddle Holders
Hand Pump
Maintenance Kit
Owner's Manual
3 Layers Reinforced Seams
Rubber Protector on Full Length of Keel
Vista prodotto

Italia
Product Description: ^#^Quantity:1 set^#^Color:As the picture^#^Capacity:30ml^#^Type:Paint Care^#^Packaging Size:12.5*9.5*5cm/ 4.92*3.74*1.96''^#^^#^Features:^#^1.Effectively remove stains from the surface of plastic parts. Prevent plastics from oxidizing and fading under sun exposure.^#^2. The sacrifical coated on the surface can be used as a coat of the barrier.^#^3. Effectively, the rubber strips prevent aging and prolong life. Super high quality finish with a protective coating to prevent oxidation and rust.^#^4. No harmful substances, such as phosphorus and chromium, on the body plastic parts and colloid, which will not cause any damage;^#^5. The Plastic Plating Refurbish Agent coated on the surface can be used as a coat After painted with this sealant, a protective layer will be covered on car body, protect your car from salt fog corrosion, bird drops, UV light, scratches, stone chips, iron powder etc.^#^^#^Package include: ^#^1*30ml retreading agent^#^1* sponge^#^^#^Notes:^#^1. Please allow 1-3 cm different due to manual measurement and 3-5g for the difference between different colors.^#^2. Due to the screen difference, the color may be a little difference from what you expect, please allow it.
8,14 €
Vista prodotto

Italia
Description^#^Condition: 100% brand new^#^Size: 127 * 30 * 0.2 cm^#^Texture Feeling Realistic Flexible Durable.^#^Self adhesive stickers^#^Face film:High flexible film^#^Heat temperature:180¡ãC^#^Temperature resistance:-30¡ãC to +80¡ãC^#^Film style:With air channels,air bubble free^#^Can be applied to moderate curves or any smooth flat surface for small car wrapping or complete wraps for cars.^#^Self Adhesive vinyl will stretch with heat for more flexible installation Coated with a UV protective layer Durable material resistant to water, dirt, grease, salt, mild acid and oil easily can be cleansed with water^#^Easily remove without residue, will not harm the painted surface of your vehicle^#^Various Vinyl sheet sizes are available to wrap dash parts, mirrors, trim or the whole exterior of the vehicle.^#^4D carbon fiber can be applied to any hard smooth surface such as hood, trunk, spoiler, lips, side pillar bars, rims, side mirrors, door handles,Roof windshield, interior trim, cell phones, laptop, speakers,Kitchen etc...^#^^#^Note:^#^Before stick them on, please clean the surface. If your car recently waxed, remove the wax.^#^Heat the sticker by hair dryer or professional heat gun for longer service.^#^Use a soft rubber squeegee to smooth out bubbles and wrinkles.^#^After stuck, do not wash the car in 24 hours.^#^^#^Package Contain:^#^1x 3D Carbon Fiber Car Sticker
3,61 €
Vista prodotto

Italia
Description:^#^Condition: 100% brand new^#^Size: 127 * 30 * 0.2 cm^#^Texture Feeling Realistic Flexible Durable.^#^Self adhesive stickers^#^Face film:High flexible film^#^Heat temperature:180¡ãC^#^Temperature resistance:-30¡ãC to +80¡ãC^#^Film style:With air channels,air bubble free^#^Can be applied to moderate curves or any smooth flat surface for small car wrapping or complete wraps for cars.^#^Self Adhesive vinyl will stretch with heat for more flexible installation Coated with a UV protective layer Durable material resistant to water, dirt, grease, salt, mild acid and oil easily can be cleansed with water^#^Easily remove without residue, will not harm the painted surface of your vehicle^#^Various Vinyl sheet sizes are available to wrap dash parts, mirrors, trim or the whole exterior of the vehicle.^#^4D carbon fiber can be applied to any hard smooth surface such as hood, trunk, spoiler, lips, side pillar bars, rims, side mirrors, door handles,Roof windshield, interior trim, cell phones, laptop, speakers,Kitchen etc...^#^^#^Package Contain:^#^1x Car 3D Carbon Fiber sticker^#^^#^^#^Note:^#^Before stick them on, please clean the surface. If your car recently waxed, remove the wax.^#^Heat the sticker by hair dryer or professional heat gun for longer service.^#^Use a soft rubber squeegee to smooth out bubbles and wrinkles.^#^After stuck, do not wash the car in 24 hours.
4,01 €
Vista prodotto

Italia
Item Type:Car Stickers^#^Material:Carbon Fiber Vinyl^#^Size: 127 * 30 * 0.2 cm^#^Color: as shown^#^^#^Features:^#^1. Can be applied to moderate curves or any smooth flat surface for small car wrapping or complete wraps for cars.^#^2. Self Adhesive vinyl will stretch with heat for more flexible installation Coated with a UV protective layer Durable material resistant to water, dirt, grease, salt, mild acid and oil easily can be cleansed with water.^#^3. Easily remove without residue, will not harm the painted surface of your vehicle^#^Various Vinyl sheet sizes are available to wrap dash parts, mirrors, trim or the whole exterior of the vehicle.^#^4. 4D carbon fiber can be applied to any hard smooth surface such as hood, trunk, spoiler, lips, side pillar bars, rims, side mirrors, door handles,Roof windshield, interior trim, cell phones, laptop, speakers,Kitchen etc...^#^^#^Note:^#^Before stick them on, please clean the surface. If your car recently waxed, remove the wax.^#^Use a soft rubber squeegee to smooth out bubbles and wrinkles.^#^After stuck, do not wash the car in 24 hours.^#^^#^Package Contain:^#^1x 3D Carbon Fiber Car Sticker
4,53 €
Vista prodotto

Italia
Description£º^#^Condition: 100% brand new^#^Size: 127*10*0.2cm/127 * 30 * 0.2 cm^#^Texture Feeling Realistic Flexible Durable.^#^Self adhesive stickers^#^Face film:High flexible film^#^Heat temperature:180¡ãC^#^Temperature resistance:-30¡ãC to +80¡ãC^#^Film style:With air channels,air bubble free^#^Can be applied to moderate curves or any smooth flat surface for small car wrapping or complete wraps for cars.^#^Self Adhesive vinyl will stretch with heat for more flexible installation Coated with a UV protective layer Durable material resistant to water, dirt, grease, salt, mild acid and oil easily can be cleansed with water^#^Easily remove without residue, will not harm the painted surface of your vehicle^#^Various Vinyl sheet sizes are available to wrap dash parts, mirrors, trim or the whole exterior of the vehicle.^#^3D carbon fiber can be applied to any hard smooth surface such as hood, trunk, spoiler, lips, side pillar bars, rims, side mirrors, door handles,Roof windshield, interior trim, cell phones, laptop, speakers,Kitchen etc...^#^^#^Package Contain:^#^1x Car 3D Carbon Fiber sticker^#^^#^^#^Note:^#^Before stick them on, please clean the surface. If your car recently waxed, remove the wax.^#^Heat the sticker by hair dryer or professional heat gun for longer service.^#^Use a soft rubber squeegee to smooth out bubbles and wrinkles.^#^After stuck, do not wash the car in 24 hours.
1,80 €
Vista prodotto

Italia (Tutte le città)
The Hanse 470, coated in a sleek AWL Grip Pearl Grey finish, is a stunner that effortlessly combines performance and comfort. Designed by Judel Vrolijk, its powerful rigging and features like electric winches and a bow thruster make it a breeze to handle, even if you're sailing solo or with a small crew. The interior doesn't skimp on luxury either; with upgraded cherry wood cabinetry and light maple flooring, it offers a bright and inviting space for cruising.
The boat's layout is both contemporary and spacious, featuring a three-cabin and two-head design. The owner's stateroom at the front includes a queen-sized bed and an en suite, while the salon offers ample seating and a proper navigation station. There's also an L-shaped galley and two guest staterooms with double berths at the back. With high-spec features like full teak decks and a complete navigation suite, the Hanse 470 stands out as one of the best sailboats ever crafted by Hanse.
DIMENSIONS
LOA: 47 ft / 14.19 m
LWL:12.60 m
Beam: 4.46 m
Max Draft: 2.34 m (Lead fin/bulb keel)
Displacement: 12.490 kg
Ballast: 3.550 kg
Mast above WL; 24.43m
CONSTRUCTION b'&' DESIGN
Judel / Vrolijk b'&' co
CE code: A (ocean)
Cruiser/Racer
Dual Wheel steering
HULL
Hand laid balsa cored hull with structural bulkheads
Epoxy vinylester outer laminates for additional strength and osmosis prevention
Galvanised steel structural subframe system
AWL Grip Pearl Grey colour (2014) with white double waterlines
Antifouling Seajet Shogun (2023)
Hull port lights in each cabin and salon
Anode 2023
ENGINE
Yanmar 4JH4-TE diesel, number E13626, 55kw/75 HP (not standard). Approx.1.550 running hours, last maintenance 2023, very good condition
3 blade folding propeller (with easy mount anode adapter 2023)
Saildrive. Oil change 2023. New cone clutch 2019 at 1.050 hrs.
Retractable bow thruster, new anode 2023.
Temperature, charging and oil pressure gauges (not standard, 2018)
Fuel/water separator
TANKAGE
Fresh water tank; 2* 190 ltr
Fuel tank; 250 ltr
2* holding tanks
2* 10 ltr diesel jerrycan
2* 10 ltr gasoline jerrycan
3* gas bottles
5* 15 ltr foldable water cans
Display for diesel, water and battery status
BATTERIES + POWER SUPPLY
3 * service batteries. Victron energy AGM 165A (mid 2021)
2* Blue top AGM batteries for bow thruster (mid 2021)
1 * 100 AH starter battery (mid 2021)
Solar panel 300 watts + smart control (Victron energy mid 2021)
Charger /inverter 220Vb'>'12V and 12V b'>' 220V (Victron energy 70A)
Inverter 12b'>' 24V (Victron energy)
Shore power connection cable
Static switch for automatically (dis) connecting (service-starting) batteries (Blue sea systems)
SAILS b'&' RIGGING
Standard self-tacking Jib; North sails, in very good condition (2010). Self-tacking system still in place, but not used because of design/performance sails
Fractional sloop rigged
Selden aluminum mast, boom and rod kicker
Back stay tensioner
Performance main sail, in very good condition (custom designed/made by Angelo da Costa 2016)
Overlapping performance Jib, in very good condition, checked by Waypoint in 2021 (custom designed/made by Angelo Da Costa 2016)
Performance gennaker 190 sqm, including launching sleeve, in very good/new condition (custom designed/made by Angelo Da Costa 2016). Including a carbon bowsprit (new condition) and enforced Halyard guide (2021)
Standard main sail; North sails, in very good condition (2010)
All lines to aft cockpit
Genoa furling system
CANVAS (ALL IN GOOD CONDITION, CUSTOM DESIGNED/MADE BY ANGELO DA COSTA)
Lazy bag + hood (2016) + lazy jacks
4* winch covers (2016)
2 * steering wheel covers (2016)
Table cover (2016)
Boom tent (2016)
NAVIGATION
Simrad Autopilot
Simrad chart plotter
4* various Simrad multi-functional instruments (wind speed/angle, depth, log, etc)
1* Bb'&'G instrument (wind speed/angle)
GB40 computer (worldwide charts updated 2014)
Simrad radar. On board and wired, but dismantled to protect the performance Jib.
Remote control auto pilot
AIS system, integrated in NMEA 2000 chart plotter (Vesper Marine 2017)
Anchor mast head light
Flairs (out of date)
Anchor signs
Compass
VHF radio
VE bus multicontrol (Victron)
DECK
Lewmar 2* primary 54ST electric winches
Electric anchor windlass (new motor 2021, new control 2019) with 60m stainless steel calibrated chain and double anchor roll + swing for easy lift/release to protect the bow
Delta anchor (bow) + swivel connector (2021)
Stern anchor + 40m anchor line
2* secondary manual Lewmar 46 ST winches
Teak in cockpit, on deck, roof, sides (in good condition)
Cockpit table
Swimming platform with swimming ladder
Swimming ladder
2* steering wheels. New leather on steering wheels (2017)
8* cylinder fenders + 3* balloon fenders
2* 25m water hose on reel
Deck (hot/cold) shower
Passerelle
Navigation lights
Rubber mooring compensators
4* High quality mooring lines
Bimini
Sprayhood
9* roof hatch covers (for dry dock storage)
Fender covers (black 2021)
Several original North sail sacks and covers
2* beach/deck chairs
1* extra winter sprayhood
1* extra lazy bag
Cover for bimini
Cockpit light in boom
Emergency tiller (steering)
Retractable mooring cleats
Wind catcher
Boatswain chair
INTERIOR
White leather upholstery
Cherry wood interior joinery
3 double cabins plus 1 in saloon berth
2 x bathrooms with toilet and showers
Eberspacher heating
Warm water boiler (both 230V and engine)
40 inch Flatscreen + multimedia PC
Ventilators in each cabine
Stereo installation, with speakers in salon and on deck (one to be replaced)
A2, B1, C1 lay-out
DOMESTIC
Cooker with oven, grill and 2 x hobs
Resin moulded sink with hot/cold water
Fridge + Freezer
Microwave (Miele)
Washing machine (Soba Babynova)
Cutlery and Crockery
Pots and pans
Toaster
Full set of sheets, pillows, blankets, duvets (2017)
DINGHY
inflatable tender in new condition (2023)
Mercury 3.5 HP outboard (2017, last maintenance 2023)
Suzuki 2.5 hp outboard (2010, on board as spare)
Stainless steel outboard motor lift (2021)
SAFETY
Life raft (needs to be serviced)
6* Life jackets (5 * Bouyance automatic)
Automatic bilge pump
Manual bilge pump
Fire extinguisher
2* Epirb MOB1 AIS (Ocean signal (2017)
Safety buoy
Life lines
First aid box
MISCELLANEOUS
Tool set
Several spare parts (spare windlass motor, start motor main engine, bildge pump, etc)
Maintenance products
4* Lewmar mosquito and sun screens on roof hatches
MAINTENANCE PROGRAM Winter2023
Refit a new radar bracket/radar (on board), starboard side mast
Repainting 4* window frames in the salon
MAINTENANCE COMPLETED 2023
New anodes (July 2023 saildrive, hull, bow thruster)
Oil change (September 2023);
main enigine + filter
saildrive
outboard engine + drive
TITLE, DOCUMENTS, TAX
Hull number DE-HANP0257C010
Ashore; Cleopatra Marina dry dock. Preveza Greece
Never chartered.
VAT paid
Dutch flag
Builders certificate (2010)
RCD/CE Compliant
Equipment/maintenance manuals
Italian and Greek navigation maps and pilots
Vista prodotto