Systems engineering

Intecs, which was founded in 1974, provides the most innovative software&hardware technology, engineering services and products for dependable safety- and mission-critical electronics systems. Intecs designs and develops applications, tools, software, hardware components and products for Aerospace, Defence, Transportation,Telecommunication and Smart Systems markets in cooperation with major European and Italian Industries, Organizations, Universities and Research Centres. Intecs is an international leader in System Engineering, mastering the whole value chain from Prototypes, Simulators, Automated Test Equipment to the finished product. Intecs employs circa 600 professionals. More than 80% of the staff has an university degree in engineering, computer science or other technical disciplines. Our headquarter is in Rome, while other operational sites are located in Pisa, Naples, Milan, Turin, Genoa, Paris and Toulouse. We're looking for EMBEDDED SW DEVELOPER QUALIFICATIONS: •Master degree in Electronic Engineering, Computer Engineering or other engineering degree with background in electronics and software development General skills: •Experience in SW development for embedded applications, in industrial or automotive markets •Problem solving •Ability to work in a team and individually •Capability of working towards tight deadlines •Good English language, spoken and written •Availability to travel Technical skills: •Experience in programming and debugging of embedded systems in C language •Knowledge of Embedded Operative Systems (RTOS) •Knowledge of common communication interfaces like I2C, UART, SPI, ecc... •Understand electronic schematics and components datasheets •Knowledge of common lab equipment (oscilloscope, multimeter, …) •Experience with software configuration management tools and defect tracking tools •Knowledge of C++/C# for Windows-based applications •CANLIN Protocols - Vector CANoe and CANalyzer knowledge Typical work includes: •Design and development of software modules from driver layer to application layer •Dealing with sensors and different communications protocols •Dealing with Testing developed software •Integrating existing software modules to work together •Preparation of reports, manuals and other documentation on the status, operation and maintenance of software •Maintaining systems by monitoring and correcting software defects Tools: •Compiler •Debugger •Versioning tools (SVN, Git) •Metrics and bugs detection software •Trace tools on embedded systems and network •Lab equipment Seniority Level: Little-Mid level. Industry: •Automotive •Electrical & Electronic Manufacturing •Information Technology & Services

Intecs, which was founded in 1974, provides the most innovative software&hardware technology, engineering services and products for dependable safety- and mission-critical electronics systems. Intecs designs and develops applications, tools, software, hardware components and products for Aerospace, Defence, Transportation,Telecommunication and Smart Systems markets in cooperation with major European and Italian Industries, Organizations, Universities and Research Centres. Intecs is an international leader in System Engineering, mastering the whole value chain from Prototypes, Simulators, Automated Test Equipment to the finished product. Intecs employs circa 500 professionals. More than 80% of the staff has an university degree in engineering, computer science or other technical disciplines. Our headquarter is in Rome, while other operational sites are located in Pisa, Naples, Milan, Turin, Genoa. We're looking for SENIOR SW ENGINEER C++/QT We are looking for passionate Qt and C++ experts to work with our customers to help them succeed with their Qt projects. Our consulting engineers provide many services including design, code development, architectural reviews, training and troubleshooting. As a software engineer you would primarily focus on the technology back-bone that drives our software applications and have a major impact on the success of our current and future products. Your qualification: • Have suitable education, e.g. BS or MS in Software Engineering • Excellent C++ programming skills • Have experience with resource-constrained devices in the embedded or mobile space • Know your way around in Linux on desktop and embedded • Experience with Windows and MacOS desktop environments • Good understanding of complex software systems • Software architectural design skills • Are curious and creative by nature • Strong spoken and written communication skill in English • Capability to work with customers to understand their requirements • Can work closely with other parts of the organization, and with the Qt community Perhaps you • have some graphics and OpenGL development experience • have worked with QNX, Yocto, embedded Linux, Android, or iOS • have experience with open source communities and development Why join us: • A chance to work with highly talented embedded software engineers • Ability to contribute to the cutting-edge technology and product • A family friendly, diverse, sociable workplace where learning is valued Site: TORINO

Knet HR is a leading Recruitment Consulting Company that operates at a National and International level with specific divisions: - Head Hunting division - Temporary Management Division - Top Manager division - Middle Management Division - Professional Studies Division Our company, authorized to operate by the Italian Ministry of Labor, does not administer personnel, therefore the employment relationship is directly regulated between the client company / firm and our candidate. FIELD TECHNICIAN Report to: GM Europe Purpose of the role: the purpose of the Field Technician is to support the commercial operations department to implement the activities associated with project execution, delivery and customer support post project completion. This should be completed to a high standard in line with contractual obligations and with a focus on customer satisfaction. The role is based in Northern Italy and the focus will be on assisting local Italian clients. In addition to this, some travel may be required to other European countries to provide installation and service support. Key Responsibilities and Accountabilities • Ensure projects are installed and delivered on time in accordance with Company Standards and with a focus on customer satisfaction • Inquisitive mind, able to troubleshoot and diagnose problems. Able to think proactively about how to resolve/mitigate any potential issues during product installation, commissioning and support. • Documentation of all key data required for gate/meter selection, product installation and commissioning as agreed/signed by customer and/or engineering firm Technical Skills · Willingness to perform aspects of masonry work subsequent to proper training · Able to understand engineering data and plans/drawings · Mechanical and electrical skills as pertaining to but not limited to: o Assembly and disassembly of product o Replacement, programming and support of RTU, instrumentation, solar power systems and motor drives o Replacement of gearboxes o Steel cable tensioning and replacement IT Knowledge · Ability and experience with PLC, SCADA and RTU systems as it pertains to but not limited to: · Data table adjustment/entry · Knowledge of I/O as it pertains to floating point registers and digital points · Communication protocol knowledge Other Skills/Knowledge · Basic understanding of electronics · Knowledge of the agricultural irrigation industry · Occupational health and safety · Knowledge of control theory is beneficial · Strong customer service skills Language Skills: fluent in Italian and strong in English; other languages are beneficial (Spanish, French, Romanian, Arabic) Skills and Qualifications: technical trade qualification; valid driving licence; 2 + years of experience Attribute: Demonstrated effective matrix skills (crosses geography’s and departments) Demonstrated ability to work with all stakeholders (internal/external) Results oriented, motivated, reliable and trustworthy working style Excellent interpersonal skills. Able to communicate with ease at different levels and with people in different locations Excellent written and verbal communication skills Business minded, logical, analytical, good strategist and implementer Well organized, quick thinker Able to work independently and as part of a team Employment type · Full-time · Permanent contract · Salary will be discussed with the selected candidate · Benefits: Company car, PC, mobile phone, company credit card, tools, etc Starting date expected: mid January 2021 Location: Mantova – Bologna – Reggio Emilia The selection is open at both sexes of Art. 1 L. 903/77 Maximum confidentiality is guaranteed KNET HUMAN RESOURCES SRL: AUTORIZZAZIONE MINISTERIALE A TEMPO INDETERMINATO Prot. 39/0003074 / MA004.A003

Knet HR is a leading Recruitment Consulting Company that operates at a National and International level with specific divisions: - Head Hunting division - Temporary Management Division - Top Manager division - Middle Management Division - Professional Studies Division Our company, authorized to operate by the Italian Ministry of Labor, does not administer personnel, therefore the employment relationship is directly regulated between the client company / firm and our candidate. FIELD TECHNICIAN – ITALIAN PLANTS WATER TREATMENT - FERRARA Report to: GM Europe Purpose of the role: the purpose of the Field Technician is to support the commercial operations department to implement the activities associated with project execution, delivery and customer support post project completion. This should be completed to a high standard in line with contractual obligations and with a focus on customer satisfaction. The role is based in Northern Italy and the focus will be on assisting local Italian clients. In addition to this, some travel may be required to other European countries to provide installation and service support. Key Responsibilities and Accountabilities • Ensure projects are installed and delivered on time in accordance with Company Standards and with a focus on customer satisfaction • Inquisitive mind, able to troubleshoot and diagnose problems. Able to think proactively about how to resolve/mitigate any potential issues during product installation, commissioning and support. • Documentation of all key data required for gate/meter selection, product installation and commissioning as agreed/signed by customer and/or engineering firm Technical Skills · Willingness to perform aspects of masonry work subsequent to proper training · Able to understand engineering data and plans/drawings · Mechanical and electrical skills as pertaining to but not limited to: o Assembly and disassembly of product o Replacement, programming and support of RTU, instrumentation, solar power systems and motor drives o Replacement of gearboxes o Steel cable tensioning and replacement IT Knowledge · Ability and experience with PLC, SCADA and RTU systems as it pertains to but not limited to: · Data table adjustment/entry · Knowledge of I/O as it pertains to floating point registers and digital points · Communication protocol knowledge Other Skills/Knowledge · Basic understanding of electronics · Knowledge of the agricultural irrigation industry · Occupational health and safety · Knowledge of control theory is beneficial · Strong customer service skills Language Skills: fluent in Italian and strong in English; other languages are beneficial (Spanish, French, Romanian, Arabic) Skills and Qualifications: technical trade qualification; valid driving licence; 2 + years of experience Attribute: Demonstrated effective matrix skills (crosses geography’s and departments) Demonstrated ability to work with all stakeholders (internal/external) Results oriented, motivated, reliable and trustworthy working style Excellent interpersonal skills. Able to communicate with ease at different levels and with people in different locations Excellent written and verbal communication skills Business minded, logical, analytical, good strategist and implementer Well organized, quick thinker Able to work independently and as part of a team Employment type · Full-time · Permanent contract · Salary will be discussed with the selected candidate · Benefits: Company car, PC, mobile phone, company credit card, tools, etc Starting date expected: mid January 2021 Location: Zona CENTO - FERRARA The selection is open at both sexes of Art. 1 L. 903/77 Maximum confidentiality is guaranteed KNET HUMAN RESOURCES SRL: AUTORIZZAZIONE MINI

Knet HR is a leading Recruitment Consulting Company that operates at a National and International level with specific divisions: - Head Hunting division - Temporary Management Division - Top Manager division - Middle Management Division - Professional Studies Division Our company, authorized to operate by the Italian Ministry of Labor, does not administer personnel, therefore the employment relationship is directly regulated between the client company / firm and our candidate. FIELD TECHNICIAN – ITALIAN PLANTS WATER TREATMENT - LUCCA - TOSCANA Report to: GM Europe Purpose of the role: the purpose of the Field Technician is to support the commercial operations department to implement the activities associated with project execution, delivery and customer support post project completion. This should be completed to a high standard in line with contractual obligations and with a focus on customer satisfaction. The role is based in Northern Italy and the focus will be on assisting local Italian clients. In addition to this, some travel may be required to other European countries to provide installation and service support. Key Responsibilities and Accountabilities • Ensure projects are installed and delivered on time in accordance with Company Standards and with a focus on customer satisfaction • Inquisitive mind, able to troubleshoot and diagnose problems. Able to think proactively about how to resolve/mitigate any potential issues during product installation, commissioning and support. • Documentation of all key data required for gate/meter selection, product installation and commissioning as agreed/signed by customer and/or engineering firm Technical Skills · Willingness to perform aspects of masonry work subsequent to proper training · Able to understand engineering data and plans/drawings · Mechanical and electrical skills as pertaining to but not limited to: o Assembly and disassembly of product o Replacement, programming and support of RTU, instrumentation, solar power systems and motor drives o Replacement of gearboxes o Steel cable tensioning and replacement IT Knowledge · Ability and experience with PLC, SCADA and RTU systems as it pertains to but not limited to: · Data table adjustment/entry · Knowledge of I/O as it pertains to floating point registers and digital points · Communication protocol knowledge Other Skills/Knowledge · Basic understanding of electronics · Knowledge of the agricultural irrigation industry · Occupational health and safety · Knowledge of control theory is beneficial · Strong customer service skills Language Skills: fluent in Italian and strong in English; other languages are beneficial (Spanish, French, Romanian, Arabic) Skills and Qualifications: technical trade qualification; valid driving licence; 2 + years of experience Attribute: Demonstrated effective matrix skills (crosses geography’s and departments) Demonstrated ability to work with all stakeholders (internal/external) Results oriented, motivated, reliable and trustworthy working style Excellent interpersonal skills. Able to communicate with ease at different levels and with people in different locations Excellent written and verbal communication skills Business minded, logical, analytical, good strategist and implementer Well organized, quick thinker Able to work independently and as part of a team Employment type · Full-time · Permanent contract · Salary will be discussed with the selected candidate · Benefits: Company car, PC, mobile phone, company credit card, tools, etc Starting date expected: mid January 2021 Location: Zona LUCCA - TOSCANA The selection is open at both sexes of Art. 1 L. 903/77 Maximum confidentiality is guaranteed KNET HUMAN RESOURCES SRL: AUTORIZZAZIONE MINISTERIALE A TEMPO INDETERMINATO Prot. 39/0003074 / MA004.A003

To strengthen its team and for specialist consultancy activities, AC&D Technologies is looking for a Python Developer living in Rome, to join our engineering team and help us develop and maintain various software products. Python Developer responsibilities include: • Writing effective, scalable code • Developing back-end components to improve responsiveness and overall performance • Integrating user-facing elements into applications Python Developer responsibilities include writing and testing code, debugging programs and integrating applications with third-party web services. To be successful in this role, you should have experience using server-side logic and work well in a team. Responsibilities • Write effective, scalable code • Develop back-end components to improve responsiveness and overall performance • Integrate user-facing elements into applications • Test and debug programs • Improve functionality of existing systems • Implement security and data protection solutions • Assess and prioritize feature requests • Coordinate with internal teams to understand user requirements and provide technical solutions Requirements and skills • 2 years of work experience as a Python Developer • Good knowledge of Linux systems (mainly RHEL and alike) and experience developing for Unix platforms. • Excellent knowledge of Git • Knowledge of object-relational mapping (ORM)Team spirit • Good problem-solving skills • BSc in Computer Science, Engineering or relevant field. Good to have • Familiarity with front-end technologies (like JavaScript and HTML5) and Python web frameworks (Django or FLask) • Experience with cloud development (Azure or AWS) Fluent English Smart working (Rome)

Professionista Project Manager, disponibilità internazionale cerca offerte lavorative. Tecnico Geometra, Eccellente mpiantistica di ogni genere, ingegneria civile, Inglese fluente, Eccellenti conoscenze edili pluriventennali, Esperienze in gestioni di vari tipi di appalti, commesse con documentazioni b'&' contratti sia inglesi che italiani, Costruzioni sia civili che industriali, eccellente meccanica/termica, idraulica, informatica, elettronica ed elettromeccanica (Tecnico del suono b'&' Fonico per hobby), Predisposizione ai rapporti interpersonali, Dinamicità, Disponibilità trasferte ovunque e in possesso di passaporto, (per vari lavori in UK, Engineering b'&' Tendering sectors), Eccellente uso computer(Windows b'&' MAC: Full MS Office, AutoCAD, PlanSwift Pro 9, Esti-Mate Software, PDF-XChange, Microsoft Project, Adobe Acrobat Professional, Photoshop(autodidact graphic designer), Gantt Project, Brava!-Reader e molti altri - Rimozione virus; Configurazione e istallazione di Hardwares, Softwares e sistemi operativi). Spiccate capacità relazionali e di organizzazione; Brillanti doti di problem solving; Forte tolleranza allo stress disponibile per collaborazioni ovunque. Per qualsiasi ulteriore info per favore chiamare: +39.392.76.70.381. Grazie! Massima serietà e affidabilità. - English ad as below: Freelance Technical Project Manager (QS/Estimator) available for Services b'&' cooperations. Quantity Surveyor graduated, Freelance Project Manager, Commercial Manager, Estimator/QS, available. Mb'&'E skills. Excellent knowledge in construction techniques b'&' complete refurbishments, complete estimating, managing, design and maintenance of: Electrical systems (domestic and industrial systems; however able to perform a complete electrical systems), Good Mechanical / Heating systems, Hydraulic knowledges, Computer science, Electronics and Electromechanical (Professional knowledge in construction techniques and complete refurbishments)....

Responsible for the installation, service and maintenance of GPI machinery in constumer facilities. The incumbent is a key member of the Technical Service team and oartners with our converting and sales teams to meet the needs of the customers. Key Responsibilities: Conducts top-level troubleshooting, diagnosis and repair of electrical, mechanical and controls related problems on machines installed at customer locations, including overhauls and field upgrades as necessaryParticipates in the development, processing and follow up of specifications during machinery tests, debugging and start up, as well as, during the development and field testing of new carton designsDevelops and maintains productive working relationships with customers and acts professionally and proactively to resolve equipment, cartons or service-related issuesAs the technical expert, partners with sales and converting manufacturing individuals and teams to resolve customer issues, as well as, support new business opportunities and product development projectsApplies continuous improvement concepts and techniques to increase equipment productivity. Participates in process improvement and cost reduction initiatives.Effectively utilizes IT systems (in-house and standard applications)Maintains skill base necessary and consistent with machinery and carton technologyProvides instruction and training to customers' staff on safety, operations, machinery maintenance and proper carton handling proceduresPrepares service reports, modified schematics, standard operating procedures and carton specification updates to support field initiatives and changesReports on progress of projects / assignments to all internal and external stakeholdersConducts audits, evaluations and assessment of machine systems / performance resultsLiaises with other companies / OEM's working on common projects This is a summary of the key responsibilities of this position. The Company reserves the right to require the role-holder to undertake such additional tasks or duties as may be within their capabilities and abide by all reasonable rules and instruction given by the Company. Qualifications and Experience Important Graphic Packaging Holding Company Good career opportunityMain Skills:Higher level of English reading, writing and speaking skills4 or more years of related experience and/or formal training in equipment maintenance, repair and troubleshooting. Knowledge of packaging or similar equipment is advantageousTechnical training with graduation or education of industrial or mechanical engineeringDemonstrated ability to ready electrical, mechanical engineering PLC and operator interface knowledgeWorking knowledge of continuous improvement methods, i.e. Six Sigma methodologyMust be prepared to travel if required on short notice. Working hours are flexible to meet Customer demands. Some shift / out of hours working will be required as necessary.Full clean driving license Key CompetenciesEffective communicator, both orally and written, with internal and external customersSuccessfully identifies root causes and resolves problems and issuesDevelops positive customer relationships through customer-focused mindset, build trustIs a team player, works well with others inside and outside the organizationIs a self-starter, has initiative, can effectively work independently with minimal direct supervisionEffectively manages time, plans, projects and related tasksFlexible approach to ensure timely and professional service to support customer and the internal manufacturing processContinuously meet targets and objectives, accountable for results Important Graphic Packaging Holding Company.Ottima opportunità di carriera.

Project Manager (progetti sia nazionali che internazionali) con INGLESE FLUENTE (Disponibilità Estero), Eccellente ingegneria & impiantistica di ogni genere, Eccellenti conoscenze edili pluriventennali, Geometra con voto 86/100, Commercial & Procurement Manager, Esperienze in gestioni di vari tipi di appalti, commesse con documentazioni & contratti sia inglesi che italiani, Costruzioni sia civili che industriali, Eccellente Direzione Lavori (sia edilizia che Impiantistica), stesura POS, PSC e ulteriore documentazione di cantiere o anche contrattuale legata sia al personale che sicurezza, Eccellente meccanica/termica, idraulica, informatica, elettronica ed elettromeccanica (Tecnico del suono & Fonico per hobby), Predisposizione ai rapporti interpersonali, Dinamicità, Disponibilità trasferte ovunque e in possesso di passaporto (per vari lavori in UK, Engineering & Tendering sectors), Eccellente uso computer(Windows & MAC: Full MS Office, AutoCAD, PlanSwift Pro 9, Esti-Mate Software, PDF-XChange, Microsoft Project, Adobe Acrobat Professional, Photoshop(autodidact graphic designer), Gantt Project, Brava!-Reader e molti altri - Rimozione virus; Configurazione e istallazione di Hardwares, Softwares e sistemi operativi). Spiccate capacità relazionali e di organizzazione; Brillanti doti di problem solving; Forte tolleranza allo stress. Disponibile per offerte lavorative considerabili con retribuzione in linea alle presenti qualità offerte. Per qualsiasi ulteriore info per favore chiamare al:_320_22.88.327_Grazie! Si assicura Massima serietà e affidabilità. - English ad as below: Technical Project Manager (Commercial & Procurement Manager) available. Project Manager, Commercial & Procurement Manager, Estimator/QS, available for Job. M&E skills. Excellent knowledge in construction techniques & complete refurbishments, complete estimating, managing, design and maintenance of: Electrical systems (domestic and industrial systems.....

Eldor Corporation è una multinazionale leader nel settore Automotive, partner delle principali case automobilistiche mondiali. L'Headquarter di Eldor è a Orsenigo (Como, Italia), dove nel 1972 l'azienda fu fondata da Pasquale Forte (Presidente e CEO). Con più di 3000 collaboratori in tutto il mondo, 5 centri produttivi (Italia, USA, Cina, Turchia e Brasile), 6 uffici tecnico-commerciali (Germania, Cina, Stati Uniti, Brasile, Giappone e Corea del Sud) e 8 centri di ricerca localizzati in Italia (Orsenigo (CO), Lomazzo (CO), Milano, Torino, Castelmaggiore (BO), Terranuova Bracciolini (AR), Corropoli (TE), Cagliari), Eldor è specializzata in ricerca, sviluppo e produzione di sistemi di accensione, centraline elettroniche, sistemi per veicoli ibridi ed elettrici e soluzioni per la mobilità urbana. Ad oggi più di 200 milioni di veicoli nel mondo viaggiano con prodotti Eldor. Diagnostics System Engineer - Electric&Hybrid Powertrain Systems: Eldor Corporation cerca per il proprio centro R&D situato nell'HQ di Orsenigo (CO) un Diagnostics System Engineer da inserire nel team dedicato allo sviluppo di soluzioni Hybrid & Electric per il settore Automotive. La risorsa, inserita all'interno dell'Area di System Engineering, si occuperà di gestire le tematiche di Diagnostica per Electric&Hybrid Powertrains Systems. In particolare, si occuperà di:  Definire il concetto di diagnostica sulla base dei requisiti del cliente e del sistema; Comprendere e applicare gli standard per i protocolli di comunicazione diagnostici e l'infrastruttura diagnostica; Revisionare i documenti dei requisiti diagnostici e fornire adeguati feedback agli autori dei requisiti in modo da migliorare chiarezza e consistenza; Definire il monitoraggio e le reazioni di backup a livello di prodotto e stabilirne la rilevanza dal punto di vista della Functional Safety; Interfacciarsi con i Team SW, HW e Produzione per negoziare e fornire soluzioni; Definire gli aspetti diagnostici da specificare in attesa dell'EOL e delle fasi di produzione; Definire la matrice di blocco degli errori. Requisiti: Laurea Magistrale in Ingegneria Informatica, Elettrica, Elettronica o dell'Automazione o percorso equivalente; Esperienza di almeno 3 anni nel settore Automotive e in un ruolo analogo; Competenze generali trasversali su tematiche software e hardware; Esperienza nella definizione dell'architettura di sistemi embedded basate su microcontrollori; Competenza su Diagnostica Automotive e Functional Safety;  Conoscenza dei protocolli di comunicazione veicolo (CAN, CAFD, LIN, XCP...) e di diagnostica (USD, KWP2000) Utilizzo di DOORS, Jira, Confluence e CM; Buon livello di conoscenza scritta ed orale della lingua inglese.

Project Manager (progetti sia nazionali che internazionali) con INGLESE FLUENTE (Disponibilità Estero), Eccellente ingegneria b'&' impiantistica di ogni genere, Eccellenti conoscenze edili pluriventennali, Geometra con voto 86/100, Commercial b'&' Procurement Manager, Esperienze in gestioni di vari tipi di appalti, commesse con documentazioni b'&' contratti sia inglesi che italiani, Costruzioni sia civili che industriali, Eccellente Direzione Lavori (sia edilizia che Impiantistica), stesura POS, PSC e ulteriore documentazione di cantiere o anche contrattuale legata sia al personale che sicurezza, Eccellente meccanica/termica, idraulica, informatica, elettronica ed elettromeccanica (Tecnico del suono b'&' Fonico per hobby), Predisposizione ai rapporti interpersonali, Dinamicità, Disponibilità trasferte ovunque e in possesso di passaporto (per vari lavori in UK, Engineering b'&' Tendering sectors), Eccellente uso computer(Windows b'&' MAC: Full MS Office, AutoCAD, PlanSwift Pro 9, Esti-Mate Software, PDF-XChange, Microsoft Project, Adobe Acrobat Professional, Photoshop(autodidact graphic designer), Gantt Project, Brava!-Reader e molti altri - Rimozione virus; Configurazione e istallazione di Hardwares, Softwares e sistemi operativi). Spiccate capacità relazionali e di organizzazione; Brillanti doti di problem solving; Forte tolleranza allo stress. Disponibile per offerte lavorative considerabili con retribuzione in linea alle presenti qualità offerte. Per qualsiasi ulteriore info per favore chiamare al:_320_22.88.327_Grazie! Si assicura Massima serietà e affidabilità. - English ad as below: Technical Project Manager (Commercial b'&' Procurement Manager) available. Project Manager, Commercial b'&' Procurement Manager, Estimator/QS, available for Job. Mb'&'E skills. Excellent knowledge in construction techniques b'&' complete refurbishments, complete estimating, managing, design and maintenance of: Electrical systems (domestic and industrial systems.....

Key responsibilities as a Brand Specialist are: · Own the relationship end-to-end with top brands · Partner internally with key retail functions to contribute to the definition of priorities and operational goals according to the brands' needs · Define joint business plans and assist in delivering impact for the brands you support directly · Regularly audit metrics to continually drive quality of the AVS experience and deliver targets · Contribute to continuous enhancement and innovation within the AVS across EUAre you a self-starter with a passion for e-commerce, looking to expand your retAmazon is an equal opportunities employer. We believe passionately that employinExperience in financial analysis, retail buying, retail planning & allocation, product/project management, marketing, business development, consulting, negotiation or supply chain is a plus · Experience using analytical specific tools such as Google Analytics, SQL or HTML is a plus · Bachelor's or Master's studies within Engineering, Commerce, Business administration or similar filed is preferred · Bachelor's/Master's degree in management, business administration, economics, engineering, marketing. Minimum of 6 months/1 year professional experience/internship · Analytical skills · Planning, prioritization and time-management skills · Ability to communicate efficiently both internally and externally · Strong attention to detail · Excellent written and spoken Italian and English · Knowledge in MS Office programs as Outlook, Excel and PowerPoint · Ability to learn new systems and tools quickly · Tenacity to develop ideas independently and thrive in a fast-paced start-up environmentAmazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build.Ottima opportunità di carriera.

Supplier Quality Engineer Important international company of healthcare. The Supplier Quality Engineer (SQE) ensures that the supply chain companies (suppliers) continually develop their process in line with the design intent of the customer and verify their systems to ensure they are compliant with the end customer's needs. This includes on-going supplier verification. The SQE is responsible for delivering all aspects of the Supplier Quality Assurance function.He/ She collects root cause analysis and provide corrective feedback to prevent line stops due to supply issues. Establish incoming inspection plans for components with the supplier & R&D department, assemblies and/or finished devices and quality department Ensure the proper risk controls are implemented at both supplier and the company, the measurement system at supplier & the company are identical, and/or capable, Monitore and analyze supplier data internally and externally gathered to identify trends and prevent potential problems Initiate and manage Supplier Corrective Actions (SCAR, SAR) in partnership with Manufacturing/Process Engineering and Quality Engineering to ensure complete and effective root cause analysis and corrective action implementation is performed promptly Use appropriate methods such as Statistical Process Control (SPC), Advanced Quality Process (AQP) tools and the metrics, proactively to identify and help implement improvement to supplier quality and supplier quality tools and processes Collaborate with other members of the supply team to establish and maintain a meaningful supplier quality scorecard. Permanent position. Inserzionista: Page Personnel

BFP GROUP is looking for a Civil Hydraulic Engineering with experience of at least 2 years on Solar and Wind Plants. Requirements: – Master’s Degree in Civil Hydraulic Engineering – Experience in Hydrological and hydraulic studies and reports, specifically for Solar and Wind Plants (at least 2 years) - Availability for national travels for site visits - Full availability for national travels to work on site during construction and/or operation – Good knowledge of English language – The knowledge of Spanish language is considered a preferential requirement - Required Software: 2D CAD Main activities: - Hydrological and hydraulic studies, including calculations and reports - Design of hydro systems and related components - Preparation of technical drawings, flow analysis, simulations concerning the behavior of fluids - Hydrogeological compatibility studies, feasibility studies and environmental impact assessments - Site visits and Supervision of the correct execution of the works, in order to ensure compliance with national regulations and standards - Technical support and verification of the size of all the hydraulic works already present, and eventually define the improvements Job duration: full time Contract: preferably free-lance Availability: immediate Workplace: Bari (Italy) Please send your application to the following addresses: [email protected] [email protected] Reference Code: P-HY-PW-BAR-07082020

In partnership with the company's CIO and senior management team, you will responsible to enhance Trendy's technology capacity/solution and service on the company's existing strong retail business and brand equity of Trendy and to ensure the planning, development, implementation and transformation of IT infrastructure, enterprise system, IT best support and deliverable that link with business needs and growth.Support the company IT strategy, provide technological guidance within an organisation, be capable to envision & influence business & technology, change to use technology as enabler for advancing quality, effectiveness, convenience & efficiency.Work closely the Chief Digital Officer to establish the best strategy to approach the digital transformation and the omnichannel strategy of the Group.Cross fertilisation will be a key to set a new vision and a cross functional approach with all the divisions and business units of the company.You will identify opportunities and risks for business, including identification of technology trends, opportunities for innovation, and assessment of marketplace obstacles and technical hurdles to the business success.You will establish and supervise the software development process, setting short-term and long-term objectives and assessing progress as defined by the selected software development methodology.Direct development and execution of an enterprise-wide information security plan that protects the confidentiality, integrity, and availability of the company's data and servers.Direct development and execution of an enterprise-wide disaster recovery and business continuity plan. Aligning the IT strategy with the overall business strategy of the organisation, you will manage the day-to-day operations of the information technology department, ensure IT operations, implementation, restructuring, innovation and service link with the needs from the various units of an organisation (such as accounting departments, risk management, HR, design, marketing, digital, retail operation, e-commerce, BUs and so on). Ensure that IT infrastructure and digital assets are working efficiently and effectively as well as technology standards and best practices are maintained across the organisation. You will maintain up-to-date knowledge of technology standards, industry trends, emerging technologies, and software development best practices and share knowledge, mentor, and educate the management, staffs, partners, customers, and stakeholders with regard to the company's technological vision, opportunities, and challenges. Collaborate with the appropriate departments to assess and recommend technologies that support company organisational needs. Ensure company technical problems are resolved in a timely and cost-effective manner. Develop, track, and control the development and deployment annual operating and capital budgets for purchasing, staffing, and operations. Temporary Omnichannel Project Challenging IT Transformation Program University degree or above in the field of engineering, computer science, information technology.A Master/PHD or MBA degree is preferred.A minimum of 10 years related working experience with at least 5 years in IT/ CIO position or a similar managerial role.Deep knowledge and substantial experience of designing/developing IT systems and planning IT implementation, project management in a leading sizeable Multinational companies.Proven leadership ability. Strategic thinking combined with strong capability in execution. A temporary manager with a specific focus on the business, someone able to convey a vision, with strategy and management skills and diplomatic approach. Monitoring in which way the ICT/Digital is impacting the company, in terms of sales, internal mood and brand awareness. Ability to set and manage priorities judiciously. Self-motivated and directed as well as service orientation mind-set. Superior analytical, evaluative, and problem-solving abilities. Excellent interpersonal skills, with the ability to motivate in a team-oriented, collaborative environment. Excellent written and oral communication skills.Fluency in Italian and English is required. Our client is a leading International retail group. Great career opportunity within multinational environment.

BFP GROUP is looking for an Electrical Engineer for Bari offices with experience of at least 2 years in the design of electrical systems (LV, MV, HV) for Solar and Wind Plants Requirements: – Master’s Degree in Electrical Engineering – Experience in Preliminary, Definitive and Final Design of Solar & Wind Plants (at least 2 years) – Experience in the design of LV/MV/HV electrical substations (at least 2 years), calculation and electrical studies - Knowledge of the grid connection procedures – Good knowledge of English language – The knowledge of Spanish language is considered a preferential requirement - Good knowledge of CAD Software Job duration: full time Contract: preferably free-lance Availability: immediate Workplace: Bari (Italy) Please send your application to the following addresses: [email protected] [email protected] Reference Code: P-EL-PW-BAR-07082020

Mansione Randstad HR Solutions per conto di MBDA Italia, è in cerca di un:    UPC Management - Ingegnere Gestionale MBDA è l'unico gruppo europeo in grado di progettare e produrre missili e sistemi missilistici per rispondere alle più svariate esigenze operative, presenti e future, per le forze armate. MBDA Gruppo conta oltre 11.000 dipendenti, tra Francia, Inghilterra, Italia, Spagna, Germania e Stati Uniti, di cui 60 % nella funzione Engineering. Con più di 90 clienti tra le forze armate di tutto il mondo, MBDA è uno dei leader mondiali nei missili e nei sistemi missilistici. MBDA è controllata con uguali regole di Corporate Governance da Airbus (37,5%), BAE Systems (37,5%) e Leonardo (25%). MBDA Italia vanta tre siti di eccellenza tecnologica: lo stabilimento di Roma, sede del management, della divisione seeker e del centro di produzione software; il sito di La Spezia, che si occupa prevalentemente dello sviluppo dei prodotti del settore anti-nave e che vanta uno stabilimento dedicato all’integrazione pirica; il sito di Fusaro, dedicato alla produzione meccanica, allo sviluppo dei sistemi a radio frequenza ed al centro di produzione dei radome ceramici. Responsabilità La risorsa sarà impegnata nelle seguenti attività: Analisi dei costi industriali; deviazioni consuntivi vs target con identificazione delle cause e coordinamento per identificazione delle azioni correttive; formulazione dei piani di rientro. Competenze Titolo di studio: Laurea Magistrale in Ingegneria Gestionale. Esperienza professionale: 0-2 anni Competenze tecniche: Conoscenza di base di contabilità generale e contabilità analitica; Conoscenza dei costi aziendali (diretti e indiretti, fissi e variabili) Conoscenza delle modalità di attribuzione dei costi e break event analysis. Conoscenze linguistiche: Buona conoscenza della lingua inglese, scritta e parlata.

Mansione Randstad HR Solutions per conto di MBDA Italia, è in cerca di un:  RF Subassemblies Manufacturing Engineer MBDA è l'unico gruppo europeo in grado di progettare e produrre missili e sistemi missilistici per rispondere alle più svariate esigenze operative, presenti e future, per le forze armate. MBDA Gruppo conta oltre 11.000 dipendenti, tra Francia, Inghilterra, Italia, Spagna, Germania e Stati Uniti, di cui 60 % nella funzione Engineering. Con più di 90 clienti tra le forze armate di tutto il mondo, MBDA è uno dei leader mondiali nei missili e nei sistemi missilistici. MBDA è controllata con uguali regole di Corporate Governance da Airbus (37,5%), BAE Systems (37,5%) e Leonardo (25%). MBDA Italia vanta tre siti di eccellenza tecnologica: lo stabilimento di Roma, sede del management, della divisione seeker e del centro di produzione software; il sito di La Spezia, che si occupa prevalentemente dello sviluppo dei prodotti del settore anti-nave e che vanta uno stabilimento dedicato all’integrazione pirica; il sito di Fusaro, dedicato alla produzione meccanica, allo sviluppo dei sistemi a radio frequenza ed al centro di produzione dei radome ceramici. Responsabilità La Risorsa prescelta si occuperà delle seguenti attività:       Setup linea e processi, incluso installazione e validazione delle macchine; Definizione di requisiti e procedure di stoccaggio ed handling dei componenti elettronici; Generazione Part Program per il settaggio delle macchine dell’intero processo di realizzazione di schede elettroniche (Assemblaggio, Soldering, Forno per brasatura, Lavaggio, Conformal Coating); Definizione della formazione tecnica per il personale di produzione durante lo start up di nuove attività produttive; Realizzazione dei prototipi contestuale alla qualifica dei processi e validazione della linea; Indicazione dei requisiti per la progettazione di attrezzature specifiche necessarie per le linee di fabbricazione di schede elettroniche (telai, fixture, maschere…); Elaborazione della documentazione necessaria alla fabbricazione dei prodotti; Failure analysis delle non conformità riscontrate durante la realizzazione dei prototipi/serie di schede elettroniche e definizione del piano di prove finalizzato a individuare la causa del guasto. Competenze Titolo di studio richiesto:       Diploma di Perito Tecnico Industriale o Laurea Ingegneria Elettronica       Esperienza professionale       Almeno 10 anni in attività di manufacturing di apparati RF. Competenze Professionali:       Macchine e Processi tecnologici per la realizzazione industriale di assemblati elettronici e RF: (Wire bonding, Serigraphy, Vapor Phase, Laser welding; Welding, Assembling) Principi di realizzazione e caratteristiche tecnologiche di substrati, PCB, Circuiti Integrati e Ibridi, nel campo di applicazione di Elettronica digitale e Radio Frequenza: High Frequency circuit materials, Semiconductor Dies, PCB Multilayer, Mutli-chip Module (MCM), Monolithic Microwave Integrated Circuit (MMIC).       Conoscenze linguistiche:       Buona conoscenza della lingua inglese.